With a silicone or silicone based glue such as Goop or E 6000.
No, polyolefin and polyamide are not the same. Polyolefin is a type of polymer made from olefin monomers, such as polyethylene and polypropylene, while polyamide is a type of polymer made from amide monomers, such as nylon. They have different chemical compositions and properties.
The percentage glue content in Polypropylene can be determined by comparing the sample weight before and after extracting the glue using a suitable solvent. The weight difference can be used to calculate the percentage of glue in the sample. Alternatively, techniques such as Fourier-transform infrared spectroscopy (FTIR) or nuclear magnetic resonance (NMR) can be used to analyze the composition of the material.
With a polycarbonate glue. Try Weld On # 3 or #16.
Super glue does not stick well to materials such as Teflon, silicone, polyethylene, and polypropylene.
Polypropylene was invented specifically to be glue resistant. You will not find any normal glue to stick it in my opinion. However I have heard (but haven't tested) that a really hot glue gun will repair polypropylene. This seems a feasible idea, and I'd suggest you try it.
Polypropylene was invented specifically to be glue resistant. You will not find any normal glue to stick it in my opinion. However I have heard (but haven't tested) that a really hot glue gun will repair polypropylene. This seems a feasible idea, and I'd suggest you try it.
Quality Glue Guns range from 130 degres C (Generally Low Melt or Cheaper glue guns) 195C (Normal Temperature) 215-C (High Temperature for polyamide or heat resistance glue sticks) More information at: http://www.gluesticks.uk.com
Polyamide is usually known as nylon.
Nylon is a polyamide.
It is not recommended to use iron-on decals on polypropylene non-woven material as the heat from the iron can melt or distort the fabric. It is best to look for alternative adhesion methods suitable for polypropylene material, such as sewing or using fabric glue.
I cannot find any record of cyclohexanone gluing polypropylene. -Personally I would doubt it as this is an oily type of solvent, and polypropylene was actually made to be solvent resistant. Polypropylene is usually joined by 'hot air welding' in which a thin stick is actually welded onto it much like metal welding. see related link for more information
You would need to use a special glue. There are 2 types that may work, both available in Walmart ,sporting goods Dept. They are intended to fix rubber water craft and wet suits.