As long as you don't over load the wall socket you can have a mile's worth of extension cord. <<>> You can not have a miles worth of cord as the voltage drop would be so high on a #14 wire that there would not be enough voltage to run the computer. Make sure that the extension cord has a ground wire in it so that the ground wire is continuous from the receptacle to the surge protector to the computer.
Possibly, but that's kind of missing the whole point of a surge protector. The surge protector exists to protect the things that are plugged into it. If you're not using those devices anyway during the storm, sure, go ahead and unplug the surge protector... but you could also have just unplugged the devices themselves from the wall and not bought a surge protector in the first place. Also, storms don't directly damage surge protectors. Stopping surges damages surge protectors. If there's no surge, it doesn't matter if the surge protector is plugged in or not.
The function of an APC surge protector, or any surge protector is to protect your electric goods from electrical surges. One could find more information on their website, if further information is required.
When looking for a quality surge protector you should consider the clamping voltage, response time, the energy absorption and dissipation rating, as well as the warranty. Two surge protector that come highly rated in those categories include the APC and Belkin Surge Protectors.
Each line would need a surge protector so you would need 3 single-phase surge protectors.
A surge protector
A surge protector (or surge suppressor) is an appliance designed to protect electrical devices from voltage spikes. A surge protector attempts to limit the voltage supplied to an electric device by either blocking or by shorting to ground any unwanted voltages above a safe threshold. This article primarily discusses specifications and components relevant to the type of protector that diverts (shorts) a voltage spike to ground; however, there is some coverage of other methods
If a surge protector had a very high resistance at all voltages, the wires in the surge protector would short out. It would kick off the protector and make it useless. A new surge protector would need to be purchased.
Reactivation of a surge protector is normally not necessary if your protector has taken a hit. Typically a protector will continue to work without the ned to reactivate it.
As long as you don't over load the wall socket you can have a mile's worth of extension cord. <<>> You can not have a miles worth of cord as the voltage drop would be so high on a #14 wire that there would not be enough voltage to run the computer. Make sure that the extension cord has a ground wire in it so that the ground wire is continuous from the receptacle to the surge protector to the computer.
With a surge protector. The surge protector opens the circuit if a surge is detected. The third "pin" is connected to a ground wire to protect the circuit from a short and to dissipate "stray" charges. Overload breakers protect users and equipment from overloads , usually caused by shorts, by heating up and opening the circuit.(same as a surge protector.)
A surge suppressor or protector is used to protect electronic devices in case of voltage spikes. A surge protector works by limiting the amount of voltage supplied to the plugged in electronic devices by blocking or shorting to ground any voltage above the safe threshold.
It will very likely damage the surge protector
a surge suppressor or protector protects your equipment from spikes on the electrical line.
A surge protector, Apex. :D
Possibly, but that's kind of missing the whole point of a surge protector. The surge protector exists to protect the things that are plugged into it. If you're not using those devices anyway during the storm, sure, go ahead and unplug the surge protector... but you could also have just unplugged the devices themselves from the wall and not bought a surge protector in the first place. Also, storms don't directly damage surge protectors. Stopping surges damages surge protectors. If there's no surge, it doesn't matter if the surge protector is plugged in or not.
The function of an APC surge protector, or any surge protector is to protect your electric goods from electrical surges. One could find more information on their website, if further information is required.