If you have already occupied capacity on the internal hard drive buses, you have option of either adding a PCI to IDE/PATA or PCI to Serial ATA adaptor card in a free PCI slot for adding more capacity. Alternatively you can use hard disks on USB Bus using external hard disk enclosures.
- Neeraj Sharma
You cannot hook up a hard drive directly to a cable box.
Hook up a USB cable from the system to your hard drive or laptop.
you take the right side of the console off and put your hard drive in
Yes, but it's done more manually
NO. Sux Dont' it.
I believe you can hook the 98 one up CABLE SELECT and it will view it just as a file system to retrieve from.
There a couple of things you can do to recover your hard drive. 1. If you have another computer, you can take out the hard drive from your sick PC and hook it up to a secondary drive to the other computer. You can buy a USB drive adapter that is universal and it's about thirty dollars. 2. Take your computer to an expert to have it assessed and fixed if you can't do it yourself. Remember: Make sure to back up all your data that is on your hard drive so that you don't have to worry!
A tool to hook up your Xbox 360 hard drive or memory card and access files off of it via Xplorer360, or Datel provided software.
The same way you defragment a normal PC hard drive. Hook it up, right click the drive in My Computer, go to tools, an among, disk clean up and error checking, there should be the option to defragment it. Once your there, just click defragment.
Yes, you'll need the power lead, and the av lead hooking up.
The easiest, fastest, and best way to do this is to use Symantec Ghost. Hook both the 'image' hard drive and the 'clone' hard drive in one machine and boot the computer using the Ghost CD. Setup the CD to copy from one location to the other (be careful you are copying the right one or all you data will be lost!) and you will end up with a perfect copy. If you don't trust this method, you can always hook up both hard drives, and copy files manually from inside the operating system, although that would take days longer than about half an hour using Ghost for 7 hard drives.
One can perform a hard drive recovery by removing the failed hard drive and hooking it up to an alternate computer through a USB universal drive adapter or if you have a Mac, using a FireWire cable to hook your nonworking Mac to a working Mac then pressing the T key as you power it on.