0
How do you hook up an old traffic light to work off a standard household outlet?
Wiki User
∙ 14y ago
Most traffic and city street lights run on 277 volts. So chances are you cannot power the light from your house power, which is 220 or 208/110 volt.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
On a standard traffic light is the green on the top or the bottom?
It is usually on the bottom of the traffic light.
Can you connect a radio to a light switch?
If you mean can you plug a radio into an outlet controlled by a light switch, the answer is yes, provided the radio does not draw more current that the circuit can supply. (This would not apply to your standard household radio, but only to a high powered unit.)
Will a 12 volt light plug into a standard wall outlet?
No, it will cause the bulb to blow. A 12 volt light is DC voltage and your home outlet is AC voltage.
On a standard traffic light is the green light on the top or the bottom?
In North America, it's on the bottom.
What is the standard signal sequence of a regular traffic light?
Green-Yellow-Red-Green For color blind people the traffic light would be upright and from top it would be. Red Yellow Green.
Household items that begin with letter t?
· telegraph · telephone · telescope · television · thermometer · thermostat · toaster · traffic signal light · typewriter
What is the opposite of heavy traffic?
The opposite would be "light traffic".
What happnes if the traffic light system brakes down?
If a traffic light breaks most cities will assign a traffic cop to regulate traffic until the light can be fixed.
What year was the traffic light inveted?
The traffic light was made in 1823.
What is a jdr bulb?
A jdr is a type of halogen light bulb. These bulbs have a screw in base, that is one size smaller than a standard household base.Ê
WHAT IS THE STANDARD HEIGHT FOR SWITCH?
For a light switch in the home four foot to centre is a reasonable height. Some contractors set the outlet box at four foot to the bottom of the outlet box and other contractors set the box to four foot to the top of the outlet box. There is no code rule that stipulates the exact height that the outlet box must be set to.
Can you convert a garage light socket to accept a three prong shop light plug in?
If you want to you could remove the light socket and put in an outlet then plug your light into the outlet.
