0
You hardware has to support RAID technology, read the manual for your motherboard. If you have Linux you can have software RAID which is slower than hardware but still can be used to for mirroring, striping and so on. In the manual should described how to create RIAD (0, 1 and so on).
You can have RAID software for windows too, but it's expensive and perfomance is not that great.
What else can I help you with?
How do you create a RAID set?
To create a RAID set, first, ensure you have multiple hard drives or SSDs installed in your system. Access your computer's BIOS/UEFI settings or RAID controller interface during boot-up to configure the RAID level you desire (e.g., RAID 0, 1, 5, 10). Follow the prompts to select the drives you want to include in the RAID set and define the RAID parameters. Finally, save the configuration and exit, then format the new RAID volume in your operating system for use.
What RAID level stripes data across multiple drives?
RAID 10
What RAID levels combined dedicated data drives with dedicated parity drives?
ghjkgh
What is a group of hard drive implementing RAID called?
A group of hard drives assembled into a RAID array is often referred to as, well, a "RAID array" a "RAID stack" or a "RAID cluster."
Which RAID level stripes data across multiple drives to improve performance?
Every RAID level stripes data across multiple drives, which improves performance compared to using a single disk. RAID 0, RAID 1, RAID 1+0, RAID 5, RAID 6, etc. all have better performance than a single disk. Other than RAID 0, all other RAID levels provide fault tolerance. RAID 1, RAID 1+0, RAID 5, RAID 6, etc. all have fault tolerance.
Is A group of hard drives implementing RAID called an array?
RAID stands for a redundant array of independent disks. Thus, a group of two or more hard disks comprise a RAID, or array of physically separate drives.
What is the best RAID to use?
The best RAID configuration depends on your specific needs for performance, redundancy, and storage capacity. RAID 1 offers excellent redundancy by mirroring data across two drives, making it ideal for critical data protection. RAID 5 balances performance, redundancy, and efficient storage use by distributing data and parity across three or more drives. For maximum performance with some redundancy, RAID 10 combines the benefits of RAID 0 and RAID 1 but requires a minimum of four drives.
In a raid array do the drives have to be identical or just the same size?
#
How do you mirror 2 drives in a computer?
Raid 1 is mirroring.
How do you replace Raid 1 drives with larger raid 1 drives?
It is relatively easy to replace Raid one drive with a larger Raid one drive. You must turn off your system, and take out the drive, and place the larger drive in its place. Next, you turn on the system, and install the larger drive.
Which RAID level mirrors one hard drive with a second drive so that the same data is written to both drives?
That is RAID 1. It uses two drives with identical data so if one fails, you have the other drive. One variation of RAID 1 used by certain controllers is to write as RAID 1 but read more like RAID 0 (but without the striping). That way, you have the write protection of a mirrored set, but can use the two drives to do interleaved reads for a read performance boost.
How do you Un-Raid 2 HDs?
Check with your motherboard manual (if it has onboard RAID), or check with your RAID controller's manual to see if it supports setting up single drives and not having a raid configuration.
