0
What else can I help you with?
How is the speed of a piston is determined?
The speed of a piston in an engine is determined by the engine's RPM (revolutions per minute) and the stroke length of the piston. The speed can be calculated using the formula: speed = (2 * pi * RPM * stroke length) / 60. Increasing the RPM or stroke length will increase the speed of the piston.
Where is the speed restrictor on a 49cc x-formula gas scooter 2-stroke?
47
How fast does a 250cc scooter go?
The 250 cc motor scooter is commonly the largest engine size scooter. The 250 cc scooter has a top speed of about 75 miles per hour, but usually the engine size will top the speed out at about 60 miles per hour.
When you ride your scooter to long at high speed the engine stops?
I'd guess the engine is overheating.
If speed of a two-stroke engine is N then what is the speed of a four-stroke engine?
It could be anything. The difference between the two is that in a two-stroke engine the piston goes back and forth (two strokes) for every ignition event (spark plug firing for a gas engine or fuel injection for a Diesel), while it goes back and forth twice (four strokes) for a four stroke engine.
Define plunger stroke in a diesel injection system?
Plunger stroke is the speed on the engine. This is the injection system on a diesel.
Why does your 50cc 2 stroke scooter cut out at high revs. It goes 70kph plus downhill but when on the flat the scooter will accelerate well and then at a point the revs drop and it goes no faster?
it has a governor or rev limiter which is there so you don't blow the engine up and the minibike is probably topped out on top speed at 70 anyways
How can you make your 50cc 2 stroke scooter faster?
To make your 50cc 2-stroke scooter faster, consider upgrading the exhaust system to a performance model, which can improve exhaust flow and increase horsepower. Additionally, tuning the carburetor for optimal fuel-air mixture can enhance performance, as can installing a performance air filter to improve airflow. Finally, replacing the variator weights can alter the scooter's acceleration and top speed. Always ensure that any modifications comply with local laws and regulations.
What is the increase decrease screw on the engine on your timberwolf atv?
The increase/decrease screw on the Timberwolf ATV engine is used to adjust the idle speed of the engine. Turning the screw clockwise will increase the idle speed, while turning it counterclockwise will decrease the idle speed. It is important to adjust this screw carefully to ensure the engine runs smoothly.
What is the scooter's kinetic energy when its speed doubles?
The scooter's kinetic energy will increase by a factor of 4 when its speed doubles. This is because kinetic energy is proportional to the square of the velocity (KE = 1/2 mv^2), so if the velocity is doubled, the kinetic energy is quadrupled.
Top speed of 49.5 cc scooter?
The top speed of a 49.5 cc scooter typically ranges from 30 to 40 mph (48 to 64 km/h), depending on factors such as the scooter's design, weight, and engine efficiency. Variations in terrain and rider weight can also affect speed. It's important to check the manufacturer's specifications for the exact model to get an accurate figure.
What oil is faster 2 stroke or 4 stroke?
Oil is a lubricant. 2 stroke oil is designed to be mixed with gasoline and in that form it lubricates the engine. 4 stroke oil lubricates the engine but is not burned as 2 stroke oil is. This has nothing to do with speed. So, the answer to your question is neither is faster as they are just lubricants.
