0
Bring number one piston on compression stroke up to TDC. Drop distributor in so that the rotor points to the number one pin inside the distributor cap. The clamp at the base of the distributor only goes one way so there is no timing with a light necessary, the ECM takes care of that.
What else can I help you with?
How do you put distributor in 2002 blazer 4.3?
how to install a distributor
How do you install an electronic distributor in a 2000 S-10 blazer with 4.3 V6 engine?
If it has coil packs, you can't.
Where is the cam shaft position sensor on a 2000 Chevy Blazer V6?
Next to the distributor
How do you replace the distributor drive gear on a 2000 Chevy blazer?
The distributor drive gear would be part of the camshaft. The camshaft would have to be replaced.
How do you install cam senor on a 2000 Chevy blazer?
Looking For the answer myself
Is it hard to install a starter for 2000 Chevy blazer?
With the right tools and knowledge, no.
What is the distributor setting for a 1996 Chevy Blazer 4.3 V6?
what is the distributor setting for a 1996 Chevy blazer
Do you have to remove the distributor on a 2000 Chevy s-10 blazer 4.3 when you do head gaskets?
Yes, the distributor has to come out to remove the intake manifold in order to remove the heads.
2000 Chrysler Sebring has power to distributor but no spark to plugs?
It could be either the crank angle sensor or the distributor module. If it is the distributor module, you have to buy and install a re-man distributor.
How do you get the top 4 bolts out of a 2000 4wd blazer transmission?
You can get them from the top with the distributor removed.
Where is the distributor cap located in a 2000 chevrolet's blazer?
behind the engine you'll see a black circle with 7 plugs coming out of it. that is the distributor cap. take the cap off and you'll see the rotor.
How do you install 1993 rodeo distributor?
install distributor rodeo 1993
