1) Turn off your computer
2) Open the computer (slide off the side panel).
3) Locate the empty PCI slot (usually white and at the end of the motherboard).
4) Insert the Firewire Card into the white PCI slot (line up prongs and push gently).
5) Fasten the card to the computer frame using a single screw to secure card.
6) Slide the side panel on again.
7) Turn on computer.
8) You can now connect your camcorder to the firewire port (use proper cable). Then you go to your couch and sit on it and press the on button and see if it works from there if it dose then go and watch sponge bob ( the person who write the thing that is above is write I am wrong HE He He)
A FireWire card adds a FireWire socket to your computer. FireWire is a type of cable and plug (like the more widespread USB) that is used to connect some video cameras, hard discs and audio equipment to a computer.
If the computer is able to accept PCI cards you will need to add a FireWire card to the computer and connect the camera to that. (See links below)
i am assuming that you know what a firewire is. not all computers come with a firewire input. if your computer doesn't have a firewire IN. then you have to buy a card, which gives you the acessability to plug a firewire cable into your computer.
firewire and usb
FireWire (technically known as an IEEE 1394 interface) is an interface developed by Apple that allows you to plug peripherals such as video cameras into your computer. Most Macs come with a FireWire interface, some Windows PCs have fireWire built in or they can have it added by adding a FireWire card. Some manufacturers adopt their own name for the IEEE 1394 interface; Sony, for example, call it an iLink. If you have a camera, or some other peripheral, with a FireWire interface it will have come with a FireWire cable which you plug into your computer to allow the two to connect so you can transfer your video/images from the camera to the computer.
computers
It depends on your computer, but generally no you can not.
First make sure firewire is enabled in bios, assuming firewire is integrated on your MB. If you have a FW card, make sure the drivers are properly installed.
that is not possible if you want to install than install it in memory card by using computer and card reader simple
no, install the graphics card correctly in your computer and then proceed to install the drivers.
in a computer, you seat it in the slot designed for your Memory Card
MiniDV video is captured to a computer in real-time as it is played back on the camcorder. A Firewire DV card is by far the best to use, it was designed for video and has a vary high transfer rate, make sure your camera has firewire, a lot of time it is marked as DV out. You can also add a firewire card to your computer fairly easily. Search for 'PCI firewire card' for desktop computers and "PCMCIA firewire card' USB won't work because the transfer rate is not fast enough. Another option is to use a professional video transfer service. They use super high quality audio cables that connect miniDV decks to high quality video cards directly. This would get you the best quality. StashSpace.Com offers this transfer service for $6.95 a tape.