you probably can't, you need a neutral and a live wire to make a fan work. switches normally only have live wires.
Installing a pull chain switch into an existing fluorescent lamp includes both mechanical and electrical issues. One has to change the wires and the switch mounts to have the two be compatible within the same fixture.
Click the link and watch a video I have posted showing exactly how to wire this configuration.
Add a light to switch from a different circuitI think here your concern is that you don't want change the performance of the circuit to which you add the light.so you have to use a relay or a solid state relay to the circuit and a separate power supply to the light in compliance with all the safety rules.
Yes you just have to "steal" power from the switch. Do this by running a pigtail wire from the hot of the switch to the hot wire of the plug. Make sure you do this before the switch or you will end up with your outlet being switched as well.
form_title=Celiling Fan Installation form_header=7383 Have you already purchased the fan(s) you intend to use for this project?*= () Yes () No How do you regulate the ceiling fan ? (Tick everything that applies)*= [] Wall switch [] Pull string [] Remote control [] Don't know How high quality of a ceiling fan are you considering installing?*= () Economy grade () Medium grade () Premium grade () Don't Know Please specify what type of ceiling fan installation this is.*= () Need to remove an existing lighting fixture and install a ceiling fan () Need to install a ceiling fan in a new location () Need to replace existing ceiling fan
Installing a pull chain switch into an existing fluorescent lamp includes both mechanical and electrical issues. One has to change the wires and the switch mounts to have the two be compatible within the same fixture.
If you are asking how to add a switch to a lamp (or other load device) cord, simply cut the line side of the cord and connect to the switch terminals. ----mikey
Good question, it really depends on the 2nd Operating System you want to install... If it is a Windows based OS you will need to Install the OS on a second drive or a new partition on your existing Hard Drive. If you are installing another OS like Linux it will give you a choice to install a boot loader that will allow a menu to switch to another OS at boot time. Here is an install guide for Vista http:/www.kapcom.com.au/How-to-install-Windows-Vista.html this is almost identical to Windows 7 Install. In a nutshell you can install a second OS without hurting your current install. More info required please
If you are replacing ceiling fans that are already existing, it is very easy to switch them out. If you are placing a new one, you will definitely need an electrician.
It is very simple to install a dimmer switch in place of a regular light switch.
How do you install a stop light switch on a 1972 cougar
Yes
If the question is, can I wire a switch to an existing light fixture (and I must assume that it's something like a pull-chain light fixture), the answer is yes.If the question is, "how do I wire a switch to an existing light fixture that has no external switch", the answer is, "in series".The attached web site gives simple instructions on how to wire a basic light switch to an existing light.See sources and related links below
You can if you have a neutral wire present. If the existing switch is what is called a "switch loop" then you can not change the existing switch to a switched outlet. You can identify a switch loop by looking at the wires coming into the switch bow. If there are only one set of wires usually a black and white and they go directly to the switch then you have a switch loop
how do install key ignition switch 1988 Chevy s10
Broan has many fans for ventilation including ones that are able to detect humidity. Another fan Broan offers is the combination of a fan and a light switch.
how do you install new ignition switch on 1989 chevy G10 van?