If you want to install a phase converter, there are specific directions that you must follow. First, shut off the electricity to the device. Next, install the converter in a dry and vibration free environment. Install a ground cable that will run from the device to the converter.
A phase converter is something that will convert a phase that you do not understand into something that is easily understandable to you. They are very useful and helpful to those that need them.
Terminology gets misapplied but a 3-phase converter produces a 3 phase supply from a single phase supply. The only proviso is that generator, converter and motor are all suitably rated and compatible.
A phase converter converts single-phase, alternating current power to three-phase power. There are two general types, static converters and rotary phase converters. A basic form of rotary phase converter is a single-phase electrical motor with its shaft coupled to a three-phase alternator. A static phase converter converts single-phase power to three-phase power by using electronic switching. They typically convert the single-phase, alternating current to direct current and then electronically synthesize three phase power output for use with three-phase equipment.
From the nameplate on the welder you find the amperage that the welder draws at the three phase voltage that you are going to use. This amperage is used to size the phase converter. This amperage is also used to size the breaker that will feed the phase converter and wire size for the installation.
It's generally better to just buy a rotary phase converter, as they are very complex.
You will need to install a phase converter or change the motor to single phase. You can find a licensed electrician at www.contraxtor.com
A rotary phase converter is a device that changes single phase electrical power into multiple phase electrical power.
lecture of three phase full wave converter
A phase converter is something that will convert a phase that you do not understand into something that is easily understandable to you. They are very useful and helpful to those that need them.
Terminology gets misapplied but a 3-phase converter produces a 3 phase supply from a single phase supply. The only proviso is that generator, converter and motor are all suitably rated and compatible.
you can use a rotophase
You can buy a rotary phase converter on home depot, Lowe's or online on http://www.americanrotary.com/
A phase converter converts single-phase, alternating current power to three-phase power. There are two general types, static converters and rotary phase converters. A basic form of rotary phase converter is a single-phase electrical motor with its shaft coupled to a three-phase alternator. A static phase converter converts single-phase power to three-phase power by using electronic switching. They typically convert the single-phase, alternating current to direct current and then electronically synthesize three phase power output for use with three-phase equipment.
From the nameplate on the welder you find the amperage that the welder draws at the three phase voltage that you are going to use. This amperage is used to size the phase converter. This amperage is also used to size the breaker that will feed the phase converter and wire size for the installation.
A single phase supply can operate a three phase motor with a static converter. No a power supply of computer cannot be fed through the static converter.
It's generally better to just buy a rotary phase converter, as they are very complex.
If you have single phase now, you have two options. One, is to install a three phase service or Two, install a roto phase device.