look at the diagram that's on the fan shroud
hat is the serpentine belt routing for 1990 ford 150 4.9
I need the routing for the serpentine belt for 1990 Ford 150?
were do i find a diagram for the serpentine belt for a 01 ford expedition
yes it does, it is not a very fun belt to do.
use a socket and breaker bar on the idler wheel to remove slack. remove old belt, follow diagram on panel or hood to install new belt
you have to release the tension on the belt via the tensioner it should be a 9/16 or 5/8 and then just pull the belt off and replace note draw a diagram of the belt arrangement
This is the escort forum not the E 150 forum.
Pull back the belt tensioner and slip the belt off. Reverse procedure to install.
MORE INFORMATION NEEDEDWhat type of engine do you have? Number of cylinders, and Liters? 1998 ford e 150 van 8 cylinder 4.6lneed to find out the serpentine belt configuration
Disconnect the battery. Remove the serpentine belt. Unhook the wires from the alternator. Remove the mounting bolts, and remove the alternator. Reverse the process to install the new unit.
The following link will get you the serpentine belt routing path for most all vehicles. Diagram 8-1 is the one for the 2000 Ford F-150 with A/C and 8 pulleys. http://www.daycoproducts.com/daycoweb.nsf/DaycoSerpentineBeltGuide.pdf Hope this helps!
About 150