Thermostat Removal & Installation Drain and recycle the engine coolant. Remove the upper radiator hose at the thermostat housing. Remove 2 thermostat housing retaining bolts and remove the housing. Remove the thermostat and O-ring from the lower intake manifold. Discard the O-ring. To Install: Clean the O-ring sealing surfaces. Install a new O-ring, on the thermostat and position the thermostat in the lower intake manifold. Place the thermostat housing on the lower intake manifold and install 2 retaining bolts. Tighten the bolts to 15-22 ft. lbs. (20-30 Nm). Fill the engine cooling system. Start the engine and allow it to reach normal operating temperature while checking for coolant leaks. Road test the vehicle and check for proper engine operation. Check the coolant level and add if necessary.
You can went to help it and Cd your software giving a help mnorozi.blogfa.com
About 150 yards.
how do i install a speed domotor cable on a 1995 f150
how to install alternator2001ford f150
A straight line in angles represents 180 degrees.
One of the engines offered in the 1988 Ford F-150 was a 4.9 L ( 300 cubic inch ) straight 6 cylinder if that's what you are asking
= "Is a 1994 ford f-150 a straight 6 or a v6 wiper? =
Straight line: 9 150 km.
Lowes charges about 150 you can usually get a handyman to install it for 75, but the opening has to be framed in already, if not it will cost more.
Pull back the belt tensioner and slip the belt off. Reverse procedure to install.
For a 1995 Ford F-150 straight six 4.9L engine the firing order is 1-5-3-6-2-4, the distributor rotates clockwise.
Answer deleted