remove the thermostat housing bolts 13mm or 14mm (it is atacched to your upper radiator hose) and remove thermostat clean intake surface and housing replace with a new a gasket anf you are done
Should be in housing at the end of upper radiator hose
Check coolant level .Then thermostat . Then hearter core
HOW TO GET A PULLEY OFF A 1998 CHEVY BLAZER
Get a Jayne's Manual @ the library & look it up.
2.8 & 4.3 V6. You can also install a small block Chevy V8.
I need diagram for 1998 chevy blazer fuse panel
Will a 2000 blazer transmission fit a 1998 s 10 chevy 4x4 truck
YES they are the same.
The fuel gauge fuse on 1998 Chevy blazer is located in the front of the blazer. It is on the driver side next to the hook latch.
NO it will not. They are complete DIFFERENT designs. Will NOT interchange.
Yes, they both had the same transmission options.
195 degrees Fahrenheit.
1998 chevy blazer wont start good spark and good fuel presure
The oil cap on a 1998 Chevy Blazer is located on the passenger side of the motor. It is just to the left of the manifold cover.
The fuse box for the fuel gauge on 1998 Chevy blazer is located on the driver side. It is near the hook latch.
follow the large hose into the motor where the hose meets the motor is the thermostat remove to 2 bolts carefully they get hot and cold alot so there easy to break
Either a faulty thermostat or you have a low coolant level.
The oil pressure switch on a 1998 Chevy Blazer is on the side of the engine block. It is located above the oil filter.
How do you install a turn signal switch on a 1998 Chevy Tahoe?
1998 Chevrolet Blazer did not have vent windows.