Pop back hatch, there are 2 screws next to the bracket on the "inside" of back hatch easily visible. Pop these 2 screws, pull the assymbly off there are 3 screws holding the light "assembly" in pop these screws and lift assembly off, pull out the light and then replace them, once you get the back hatch opened should take all of 3-5 minutes
It is quite easy to install the 1992 Chevy Lumina brake light switch. The brake light switch simply plugs in and out.
where location of brake light switch on 1989 chev, truck.
I have a 1998 Chevy 2500. I would like to know how to install the brake switch, and does the switch affect tran from park to drive in shifting?
Look under the dash on the 1996 suburban, and locate the brake light switch on the brake pedal arm. Remove the switch nut, and slide the switch out. Unplug the wires from the switch and install the new switch.
the brake light switch is just above the brake pedal. I just bought one for my own 97 tracer yesturday and need to install it.
yes, it's located at the top of the brake pedal
The brake light switch is threaded into the master cylinder. Open the hood, look at the brake master cylinder, notice the brake light switch with wires connected. Have new one ready to install when you remove the old one to keep loss of brake fluid to a minimum.
where is brake light switch
Usually located at the upper end of the brake pedal under dash area
You can try to reset your brake light switch by unplugging the brake light switch and plugging it back in. If that does not solve your problem you will need to replace the brake light switch.
a switch that is trigered to light up the light when the brake pad is pushed in
check with the dealership there was a recall to replace the switch for free! I had mine replaced...tombo