How do you install mother of pearl mosaic?

Answer 1

There are 8 steps,for making it much easier,we make one installing processing photo for reference. Pls read these instruction as

this following photo.

1.We suggest choosing the special agglomerant and building sealant(We suggest to use tiny granule glue or white grout).

2.After clean the area where you are going to install, stick 2-3mm thickness agglomerant. Using the trowel for making the

agglomerant's surface flat.

3.Make the wave strip through the tooth trowel;

4.When you are installing, you should make sure the sheets distance the same as the chips distance(chip to chip distance=2mm);

5.Press the shell mosaic surface lightly. Make sure all the chips gaps covering the same agglomerant. But should make sure the

agglomerant will be not out of the gaps;

6.Wait for 20 hours,when the mosaic agglomerant totall dry, then use the building sealant filled with the mosaic chip's space

with the sponge trowel. Note: Please use the sponge trowel, others will damage the mosaic surface.

7.Wait for half hour(For tiny granule glue 20 minutes is okay). When the building sealant is half dry, use the high quality sponge

put the clean water inside the 1-2mm thickness space. This step is important, don't wait for them totally dry, or you will hurt the

shell mosaic surface when you are doing the cleaning in the last step.

8.Then use the dry and clean towel to clean the mosaic surface is ok.

3.Shell Panel or Shell Tiles Application & Installation

Commonly use to the backing such as MDF, Marble, Ceramic, Calcium Silicate Board, Plasterboard, Acryl and Metal. Using AB

adhesive or all-purpose adhesive, apply even coat of adhesive to the panel and wall, and waiting for 5 to 8 minutes, then press it

carefully to the wall. Immediately wipe off excess adhesive with a soft wet cloth, and dry with a clean soft cloth afterwards.

4. Protection and Cleaning

1. Please wipe the surface with charpie to reduce the nick;

2. Please clean the surface with neutral detergent;

3. Please wax shell mosaic surface regular time;

Please Attention

1.Do not irradiate the surface with 100W above light.

2. The detergent should be faintly acid,because the content of shell mosaic are CaCO3;

3.Would better use tham soft cloth clean the surface,and wax them regular time for keeping the shiny.

All the information are copied from Solar Shell Decorative Material Co.,ltd

This is not stand for my opinion. Just for giving some help. And their website is in the related links.