0
How do you install viola string which string goes on which peg?
Wiki User
∙ 14y ago
The smallest string is string 1. it goes on the on the lower right peg when facing the front of the viola with the pegbox up.
String 2 goes on the upper right peg.
String 3 goes on the upper left peg.
String 4 goes on the lower left peg.
There should be some old strings on it. Put the news ones where the old ones are.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you fix the cello pegs?
The only way to fix a string that broke at the peg is to replace it carefully with a new string. Your teacher or orchestra director can do this for you, or you can take your instrument to a reputable shop.In almost all cases, a broken string cannot be repaired, it has to be replaced with a new string.
What are the parts of the viola called?
bridge, fingerboard, scroll, strings, nut, tailpiece, pegs, finetuner(s), f holes, sound peg, chinrest, frog, tip, and voila! a viola.
What should you do if your violin string is loose?
Turn the peg to tighten the string to the proper note. If you don't know how to tune ask your teacher. If you don't have a teacher, get one.
How is sound made on a viola?
Either the player's fingers pluck the strings or he or she uses the violin's bow to rub on its strings, thus creating vibrations.The vibrations of the strings enter the violin's body through the bridge and are transmitted from its base to the back of the violin via the sound-post.The sound-post is a short wooden stick or peg that is placed just underneath the bridge inside the body, where it is wedged between the front and the back surfaces of the violin.Thus both the front and back of the violin are made to vibrate, making the sound become greatly amplified.Sound is produced by a violin when the strings are caused to vibrate. This vibration happens by either plucking the string or running a bow across it.
What pegs go to what guitar strings?
There are actually two types of pegs on a guitar: Tuning pegs Bridge pin pegs There are six of each. A tuning peg is a peg at the top of the guitar and is use to tighten the strings therefore 'tuning' the guitar. A bridge pin peg holds the other side of the string firmly in place.
How you fix a viola string?
Firstly, bent the tip of the string slightly so that it can "hook" or anchor on the peg. Next, place the end of the string into the bottom hole where the fine-tuners are. Turn the peg clockwise, until the note is reached. Make sure that the string is on the bridge, and in its respective positions.
How do you fix a sliding viola peg?
one thing you might be able to do that my music teacher has said is to take the sliding peg and drill another hole in it for the string to go through farther from the edge of the pegbox as the original. NOTE: I mean the hole in the peg, NOT THE PEGBOX) Only do this if the string is touching the side of the pegbox as this could be the problem. This used to happen to a violist in my orchestra and he got really frustrated, and this is what he said to do.
Will a bent tuning peg make the string slip?
No, as long as the string is attached properly and the tuning peg itself doesn't slip.
What can you use to fix a violin string?
Take the damaged string out then put the new string where the old string used to be. Thread the string into the fine tuner hole things and the other end into the peg box. Turn the peg until the string is in tune.
How would you draw a circle on the ground with a radius of 5 meters?
Put a peg in the ground where you want the centre of the circle. Tie a string to the peg - loose enough so tat the string is free to rotate around the peg. Measure 5 metres along the string, from the peg, and at that point tie something that will mark the ground - a stick, for example. Walk around the central peg, holding the stick to the ground and keeping the string taut.
How do you fix the cello pegs?
The only way to fix a string that broke at the peg is to replace it carefully with a new string. Your teacher or orchestra director can do this for you, or you can take your instrument to a reputable shop.In almost all cases, a broken string cannot be repaired, it has to be replaced with a new string.
How do you fix a double bass string?
Firstly, bent the tip of the string slightly so that it can "hook" or anchor on the peg. Next, place the end of the string into the bottom hole. Turn the peg clockwise, until the note is reached. Make sure that the string is on the bridge, and in its respective positions.
What are the parts of the viola called?
bridge, fingerboard, scroll, strings, nut, tailpiece, pegs, finetuner(s), f holes, sound peg, chinrest, frog, tip, and voila! a viola.
How do you tighten string g on an electric guitar?
Turn the peg at the top of the guitar right if you are loosening the string, left if your tightening the string. Hope it helps- Roxas riku
How does one string an ukulele?
Start by securing the string to the bridge securely. This can require a knot, or a wrap technique, or even a small bead on the end of the string. Take the other end of the string and insert it in the tuning peg. Pull tight on the string and turn the peg until the string is taut. You do not want to have more than one layer of string on any of the tuning pegs. Cut any loose ends off the string. Repeat these steps for the rest of the strings on the ukulele.
How do you fix a violin string?
Firstly, bent the tip of the string slightly so that it can "hook" or anchor on the peg. Next, place the end of the string into the bottom hole where the fine-tuners are. Turn the peg clockwise, until the note is reached. Make sure that the string is on the bridge, and in its respective positions.
Why does my Dean guitars bottem E string 'the tiniest one' keep breaking at the tuning peg every time i tune down?
Check to see if the small hole in the peg isn't overly sharp or you are putting a "kink" in the string as you are putting it on. The string gets a kink in it when you put it on then as you unwind it to tune down it snaps.
