answersLogoWhite

0

Replace thermostat , fill with coolant then leave the rad cap off for 30 minutes at idle to bleed air out and top off the coolant; that will do it.

User Avatar

Wiki User

19y ago

What else can I help you with?

Related Questions

Can a water temp sensor affect the starting of a 350 Chevy engine?

No.


What makes a chevy performance eldblock 350 intake heat ups?

the temp of the intake manifold is controlled by the temp of the water in the block.


What is the normal water temp for a 71 El Camino 350?

Normal temp for a 71 El Camino 350 is in the 185 to 195 degree range. The thermostat can be changed to a different temp to make the engine run a little hotter or cooler.


What is the maximum water temperature for a 350 v8 ENGINE?

maximum water temp. for all engines is approx. 90 c


What temp should 350 run at the head?

If you are asking about the water temp, older ones were usually 180, newer ones were 195. If you are asking about the exhaust gas temp, 1350 is safe.


Awhere is your temp sending unit on your 1990 Tpi 350?

Below the water neck on the front of the intake.


Where does the water temp gauge go on a 350 motor?

most fuel injected 5.7 engines the water temp sensor is mounted in the thermostat housing where the upper radiator house connects to the intake manifold.


What temp is boneless chicken done?

350 degrees F.


Will 350 vortec heads work on a sbc 350 engine?

the water jackets are different , the motor will keep running hot


What temp do you bake chicken breast?

350 for 15-20 min


What is the water temp specifications for Chevy 350 v8?

later model 350's run thermostats around 195 degrees, but older 350's didn't run that hot of a thermostat. I've seen them as low as 160 to 180 degrees on older 350's.


What is the temp to melt hard candy?

350 degrees