You have to use some form of sanitation. Easiest and less expensive being chlorine.
28 or 30 mil
The experts at Advanced Pool Coatings have been installing fiberglass coatings over vinyl liner pools for over 30 years. You can read more at: http://www.advancedpoolcoatings.com.
Vinyl pools are generally "pretty good"! Tens of thousands of people have vinyl-lined pools (both above and below ground) and enjoy them completely. There are pros and cons of both vinyl and gunnite lined pools. I would suggest that you talk to several pool builders and pool owners of each kind to get an idea of the relative merits of both. I have a vinyl pool and wouldn't have any other. The bottom is so soft on your feet. The kids can play in the pool for hours and hours and have no problem with their feet. It is slightly less expensive to build and to replace the liner (maybe about 10 years) is not nearly as expensive as replastering/repairing gunnite. The only reason I see that people I know get gunnite is there seems to be more prestige to it than vinyl. One woman said to me once about one of her neighbors that had gunnite, "Oh she has a real pool". Don't listen to her, vinyl is great, my liner is beautiful and it's less expensive. Live in Texas and have had inground vinyl pool for 19 years - have replaced liner twice - cost about $ 1500 8 years ago to replace. Now need some work done on coping (pulling loose)and fiberglass steps need refurbishing. If I can find someone to do repairs at reasonable cost will keep pool. Received quote of $30 + a few days ago to replace with gunite pool. Have enjoyed our vinyl pool. We winterize and shut it down in Sept and open back up May or June and therefore do not have the cost of running the pump during that time. The water is crystal clear when we remove the cover to reopen. My brother has owned a vinyl pool for 20 years and never had any problem with it. It is just as beautiful as any "supposedly real" pool. I've only had my liner for 4 years and it's doing quite well.
Well first of all there is no such thing as a fiberglass pool. You can have fiberglass walls instead of steel but your pool is still vinyl because you need a liner. These are the usual combinations of inground pools. Sand floor, steel walls, vinyl liner Sand floor, fiberglass walls, vinyl liner Vermiculite floor, steel walls, vinyl liner Vermiculite floor, fiberglass walls, vinyl liner Concrete floor, steel walls, vinyl liner Concrete floor, fiberglass walls, vinyl liner Concrete floor, concrete walls, no liner Concrete pools have to be painted with epoxy paint or if you want tile installed then usually you plaster over the concrete. Now a days 3 and 4 are the most common inground installs. 1 and 2 are usually pools that are 30 + years old although you can still have them done that way. In South Alabama the cost of a 20 *40 vinyl pool will cost around 18 to 22 thousand
Both are fine. Due to the short season a vinyl liner pool will hold up for many years. The problem with a viyl liner pool is you have to stick to certain set sizes and designs. Small leaks can be patched, or eventually replaced with a new liner. A concrete or gunite pool will last for 25 - 30+ years. They can be constructed in custom designs.
This would be the the excact same price as building a new concrete pool minus some excavation. you would be looking in the 30-to 40k range.
There are 5280 feet in a mile.The perimeter of a 30 x 30 foot pool is 120 feet.5280 ÷ 120 = 44NOTE: Keep in mind that you aren't really swimming the true perimeter of the pool so it may take more laps to get a true mile.
It depends how deep the pool is
30 feet!
Not likely
The Pool Boys was created on 2011-09-30.
the rate that water is coming into the pool, is the amount of water in the pool (x) divided by the amount of time it take to fill the pool. x / 10 the rate to empty the pool is x / 15 the rate to fill the pool wile it is being emptied, is the rate filling the pool minus the rate emptying the pool. x / 10 - x / 15 simplified 3x / 30 - 2x / 30 this gives x / 30 divide the rate the pool is filling, by the amount of water. (x / 30) / x this gives a time of 30 hours to fill the pool.