0
How do you know that your company network is Ethernet or Fast Ethernet?
Wiki User
∙ 11y ago
arjean
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What main cable used to connect computer on a network?
An Ethernet cable Computers are networked with network cables (ethernet cables as stated above), also know by their rating, cat5 cat5e cat6 etc. A network cable runs from a computer to a switch, which is like a busy junction that co-ordinates data traffic between machines.
You are a user in a company that would like to connect to the company's wireless network. What information must you know in order to connect to the wireless network?
encryption key
3 If you have been called in to design a network for your company What if your company subscribes to a class B IP addressing You are required to subnet the network in your design such that at least 10?
i dnt know
What is the Mac address used for?
The address for a device as it is identified at the Media Access Control (MAC) layer in the Ethernet networkarchitecture. The MAC address is usually stored in ROM on the network adapter card and is unique.When reaching another host on your own network, or when accessing a router on your network to reach another network, The IP address (4 numbers separate by dots) is converted to the MAC address of the host or router on your network. When the message or packet(S) are sent out, the device with that destination MAC address recognizes that it was meant to receive the message and accepts it. Any other device on the network that can see the transmission is expected to ignore it.An exception is a device or router that is configured to be "promiscuous". Such a machine will also accept and process all transmissions even if meant for another device. This is often used for network monitoring/logging, maintenance, and problem resolution.Although the MAC address is hard coded into the network interface or device, in almost all cases it can be changed. An example for this is when an ethernet network is used with the DECnet protocol. DECnet can be used instead of or togetherwith TCP/IP (or Netware or NetBEUI). The DECnet protocol requires that the MAC address be changed to incorporate the DECnet address as part of the MA address.A MAC address is the serial number of a network card - or other equipment that connects to a network, usually an Ethernet network. In an Ethernet network, the MAC address is used as source and destination address, to know who is communicating with whom. For example, a switch uses the MAC address to forward a frame (a pieces of data) to the correct computer.
What is the name of the connector used on a network cable?
UTP most commonly used network cableCat 5 and Cat 6 network cables (also called 10BaseT) use an RJ-45 connector. Older thinwire ethernet (10Base2) uses BNC coaxial connect. Original thickwire ethernet used a special thicker cable with a proprietary AUI connector. The old IBM Token Ring system also used its own special cabling and connectors.
What is chick fil a company type?
Chick-fil-a is a fast food company heller who didint know tht lol jk hahahahahaha
What type of company is Chick-fil-a?
Chick-fil-a is a fast food company heller who didint know tht lol jk hahahahahaha
What are your Future Plans for mobile company?
I don't know make all the mobile networks join together to make a super network and then u worldnt have to worry about network coverege
How do you know that your computer has Ethernet card?
Look at the back panel of the computer. If it has a phone line-looking port except wider that has "ETHERNET" written on it, it has it.
What distribution selection strategies which a company will adopt for fast moving consumer goods?
I also dont know I also dont know I also dont know I also dont know
How do you cancel your All Access Network membership?
The way to cancel your all access network membership is by first calling the customer service rep for that company and letting them know that you want to cancel your membership.
Can you use 2 Ethernet cables to connect a laptop to a PC computer and to the internet?
Your laptop, and probably your PC will probably not have 2 Ethernet ports to connect two Ethernet cables. It is possible to use both WiFi and your Ethernet port. It is also possible to add an additional Ethernet card to a PC or add a USB or PC-card based Ethernet interface. If you did have a machine with two Ethernet ports or wanted to use both an Ethernet port and a WiFi connection, there is a routing problem. The system needs to know when to send (route) something to the internet and when to send it to the other computer (PC or notebook). You would need to manually assign the default route (for the internet connection) and with a different network id, assign network IP addresses to the connections between the notebook and the PC. How this is done depends on the systems you are using. It is different for Microsoft Windows and Linux implementations and may even vary depending on the version of Windows. A more practical method is to connect both machines to your internet connection, your router. They will be on the same network. They will both be able to access the internet. They will both also be able to communicate with each other through the router. Learn how to, or find someone to, configure file sharing on both machines and establish which file and/or directories should be visible to the other machine or machines on your network. If you are using a Unix or Linux version you can still share files by configuring a program called Samba. You will need do learn how to do it or find someone who already knows how.
