Want this question answered?
there is two main things that will cause an elantra to have no spark the ignition coil pack or the crankshaft sensor
== ==
to replace the ignition coil on a 2001 elantra 2.0.....take the plastic cover out(5 bolts...10mm) once you see the coil pack to your right........................................ disconnect the plug wires....make sure to keep it in order....... there are 2 bolts attached to each side of the pack take them off......then disconnect carefully the 3 cables attached to the pack ...put the new pack....bolt it in...plug the the 3 wires ....then connect the ignition wires and you are done.....put the plastic cover back....................remember to disconnect battery before you start working on this.
what is the number coil pack
careful if you do not know never turn engine over next to coil be advised
Most automobiles will not start with a nonfunctioning coil pack. The coil pack will cause the spark plugs not to fire.
There is no coil wire. There is a coil pack and connected to the coil pack is the ignition control module.
Coil Pack
The purpose of a coil pack is to supply the spark to the spark plugs.
how to change coil pack on 1998 plymouth neon
Go to AutoZone have them rear your codes for FREE. This way you will know which Coil Pack is goig bad / or is bad. If you have a 4.6L you will have only 2 Big Coil Packs. If you have the 5.4L you will have 8 Coil Packs , One coil pack for each cylinder.
The coil pack, on a 1996 Chevrolet Cavalier, is located on the top of the engine. The coil pack is near the electronic spark distributor.