0
Answer
You should remove slide, retun scope to low power, turn off light, clean the lens(if asked) and put it away.<
Wiki User
∙ 12y ago
Wiki User
∙ 13y agoWell check your instruction manual. If it does not have it, look online on the manufactures site. Thanks for asking
ASKMEAHOLCIC
Add your answer:
Earn +20 pts
What should a be done whenever you are finished using a microscope?
Remove the slide ,return the scope to low powered and ,turn off the light .
What should be done whenever you are finished with a microscope?
remove the slide,return the low-power objective, use lens paper to clean the stage of microscope and the lenses
How do you properly put a microscope away after you are done using it?
Turn the microscope off
What should be done if a microscope has a missing part?
Replace the missing part.
What should be done when ever you are finished using a microscope?
Remove the slide or sample. Turn off the lamp or light source. Turn off power at power point. Gently wind down the higher magnification to the stop position. Clean the objective lens if oil was used ( to stop the oil oxidising on the lens). Cover the microscope to protect from dust. Carry with two hands, one under the base, the other on the neck or column. Store away from heat, light and moisture.
Should be done whenever you are finished using a microscope?
Remove the slide ,return the scope to low powered and ,turn off the light .
What should a be done whenever you are finished using a microscope?
Remove the slide ,return the scope to low powered and ,turn off the light .
Which should be done when you are finishied using a microscope?
The light must be off
What should be done whenever you are finished with a microscope?
remove the slide,return the low-power objective, use lens paper to clean the stage of microscope and the lenses
What should be done whenever you are using a microscope?
Put it in a safe place. And clean it first
What should be done when you are done with a microscope?
Remove your eyes from the eyepiece of the microscope.
How do you properly put a microscope away after you are done using it?
Turn the microscope off
What should be done whenever you finish using a microscope?
Remove the slide ,return the scope to low powered and ,turn off the light .
What two basic principle are involved in using microscope?
The two basic principles that are involved using the microscope are magnification and observation. They are both done by examining an object through the lens of the microscope.
How do you increase the contrast between the nucleus and the cell contents using a light microscope?
You can't change the contrast on the microscope, that would have to be done using dyes.
What should be done if a microscope has a missing part?
Replace the missing part.
why should preliminary focusing of microscope be done upward?
It will bring an object into focus..
