You can't fold down the seats, they are bolted in...
On the headliner just above the back of the passenger seats. 5.25"
To remove the front seats from a 1990 Olds 98, first, slide the seat all the way forward to access the rear mounting bolts. Use a socket wrench to remove these bolts, then slide the seat backward to expose the front bolts and remove them as well. Disconnect any electrical connectors if the seats are powered, and carefully lift the seat out of the vehicle. Make sure to have someone assist you, as the seats can be heavy and cumbersome.
Seats from a 02 Tahoe will not fit in a 98 Tahoe. The 98 Tahoe is smaller than the 02.
Seats for a 02 Tahoe will not fit in a 98 Tahoe. The reason they will not fit is because the 98 is to old.
My 98 navigator has buttons on the knobs on the side of the seats.
The engine computer on a 98 Holden Vectra is reset by disconnecting the battery for 30 seconds. This allows the computer to power cycle much like a home PC.
2 seats Passenger + Driver
Pull the back seats down then take the cover off. Just pull it up and then unscrew the speakers.
* On fixed seats remove the bolts at base of the seat back sidecushions and detach them.Remove the two bolts at the rear of the seat cushion and detach the cushion assembly.Remove the two bolts at the base and remove the seat back * On folding seats remove the two bolts at the front of the seat cushions and detach the cushion assembly.Fold the seat backs forward remove the bolts and lift the assembly out
Yes
No