Want this question answered?
Unless Ure a Woman Or Seriously A donut Ule Know It Is Under The Bonnet ......lol ....Na It Should Be Under The bonnet On The Left Hand Side Right Next To The Oil Stick....
You can get onto MK Dons an ask about it.
hi i have a clio 1.2 2001 and have a fault code p0225 throttle/ pedal position sensor switch c circuit. i have changed the throttle pedel and has made no diffrence the vehicle still wont rev up but cant find the throttle position sensor under the bonnet please can you tell me were it is located. thank you.
The sensor is damaged or missadjusted.
It's the big red lever under the steering wheel. Once you pull that down, the bonnet will 'pop up'. Then, in the gap inbettween the bonnet and the grill, hold up the metal bit you can see connected to the lock in the middle and lift up the bonnet.
the bonnet release lever on my 1991 205 is underneath the glovebox on the side by the door, and when the bonnet pops open, there is a small catch roughly in the centre, push it up (towards the bonnet) and pull the bonnet open.
Depends what model, I have a 1998 1.2 R reg. Under the bonnet on the passenger side of the car, right by the windscreen there is a small plastic "grill" style thing. If you lift it up the washer reserve is a white bottle underneath..
Hi,I assume that the bonnet is the same as the Connect and Focus?If it is, there is a lock on the bonnet/hood. Either behind the badge or the flip up panel
You simply grab both of the little end pieces(used for bikini line) and pull up. I had trouble with it the first time too ;)
the Ford badge on the front of the bonnet lifts up to reveal the bonnet release lock. Use the ignition key and turn to position 1, lift the bonnet, then turn to position 2 to fully release
bonnet pull is up & to the right of the accelerator pedal & release on bonnet is left middle of bonnet at the fron its tricky so keep searching
first you have to open the bonnet from the driver's left side and when you put your hand under the bonnet there is a metal thing and you have to push it up than put the holder