With the muzzle pointed up, measure a charge of gunpowder, pour it down the barrel. Bump the butt to settle the powder. Place a greased cloth patch over muzzle, place ball on patch, press in with ball starter, then ram all the way down with ramrod. REMOVE RAMROD FROM BARREL. You can now place percussion cap on nipple, or priming powder in pan.
It only takes a few seconds if you practice it enough! There are more steps for a muzzle-loader than just putting a pre-made cartridge into a slot.
Bear the load. Bare the load would be to uncover the load...
sudden load differ from impact load by the velocity of loading
I think there are 4 types of load cells they are Pancake Load CellS ,Beam Load CellLoad, ButtonSingle and Point Load Cell.
dead load and live load dead load is the load of weight that is on the floor that is part of the construction of the house live load is the weight you add to it as in people furniture etc,
sustained load expansion load occasional load Load COMBINATION sus+exp=opn sus+ occasional and load combinations need not be done is sus+exp+occasional
2
They are called muzzleloaders simply because the powder and bullet are loaded from the muzzle end of the gun, Here is a page from WIKIpedia that may help answer.http://en.wikipedia.org/wiki/Muzzleloader
One way, and the simplest, is to look on the barrel , if the weapon says"BlackPowder Only", it is not an original. Otherwise the blue book of muzzleloader values is a good place to start.
Which type of muzzleloader may be equipped with a mechanical safety?
Yes
No
Cabella's
That depends on the make and model.
removing the breech plug
rust
Unknown
100-400