maurice
The FD 100 is usually loaded by placing a roll of paper. To load the paper, simply open the FD 100 machine and place the paper.
NO LOAD:--- as it is very clear from the word itself that it is no load that means no load has been applied to the machine..i.e.the output terminal of machine is open circuited FULL LOAD:-- the maximum load value that can be applied to the machine at which it can work without damaging any part of the machine is called machine working at full load.
1) Open the rear cover (top of machine). 2. Install paper with sheet pointing to front of machine. Carefully feed paper into and thru slot between metal ribs and plastic feed slot (it is very small, so find it by looking for light thru the slot). 3. Shut cover, and paper should feed about a 1/2 page thru and cut it off automatically. Note: If paper starts jamming or shuddering as the paper feeds, you have either installed the paper backwards, or you have fed the paper thru the wrong slot (there are actually two openings, and the larger more obvious opening is the wrong one).
A strapping machine is used for sealing packages, bundling items, to secure coils of paper or steel. The machine is used to load rolls of materials that are then dispensed to perform strapping around a given item.
load in terms of any electrical machine is of 3 types mainly :- 1)resistive load--it means the load connected is a resistor only. 2)inductive load--it means the load applied is an inductor only. 3)capacitive load--it means the load is capacitor only. 4)also there may be combination of all these types or any two of the above loads like capacitive -resistive load;capacitive -inductive load. NO LOAD:--- as it is very clear from the word itself that it is no load that means no load has been applied to the machine..i.e.the output terminal of machine is open circuited FULL LOAD:-- the maximum load value that can be applied to the machine at which it can work without damaging any part of the machine is called machine working at full load ---------mrityunjay pandey (kiit university ,btech 2nd year)
The static load of a machine tool is the pressure exerted by the base of the machine (at rest and without a workpiece or tooling loaded).
Shock load is a machining term. Shock load is when a sudden intense force is placed on the parts of a machine. The machine often cannot handle the pressure.
how do you load a floral pick machine
It depends on the specific model of fax machine you're using. Generally the paper is loaded in the back or the bottom of the machine, if it's a paper roll then usually the machine needs to be opened up to get to the roll.
Front-load simply means that the washing machine door is on the front face of the washing machine, rather than a lid that lifts from the of the washing machine (top load). One would 'load' the clothes into the washer through the open front, hence the name front-load.
The drum is the spinning section of the machine where you load your clothes into.
Inclined plane .