0
What else can I help you with?
How do you loosen the belt tensioner on a 2005 Chevy trailblazer?
On the tensioner arm there is a bolt holding it there. To the right of the bolt will be a square cut into the arm of the tensioner, use a 3/8 inch socket wrench (no attachment, just the wrench itself) and turn to the right this will loosen the belt to remove it.
Belt changing belt on trailblazer?
You can change the serpentine belt on your Chevrolet trailblazer, by loosening the tensioner pulley. With the loosened tensioner pulley the belt will come off easily. Tighten the new belt with the tensioner pulley.
How do you loosen a drive belt on a 1992 Buick Century?
Insert a socket or wrench on the spring-loaded serpentine belt tensioner then pull back; the belt will loosen.
How do you get the accessory drive belt or serpentine belt off of a 1989 sunbird?
To remove the accessory drive belt or the serpentine belt from the motor on a 1989 Sunbird, it is necessary to loosen the belt tensioner. Look for a pulley that has a bolt in a slot. Loosen the bolt and move the tensioner so there is a gap in the belt. Then remove the belt from each pulley.
How do you replace a fan belt on a mercury mystique?
fans are driven electronically no belt. The serpentine belt is taken off by taking the tension off at the tensioner and replacing by following the pattern on your strut tower.
How do you remove the serp belt on 1997 suburban?
locate belt tensioner below alternator on pass. side insert 3/8 drive ratchet in center of tensioner pulley rotate to loosen belt remover belt
How do you change the belt on a ranch king riding lawn mower?
You can change the drive belt, on your lawnmower, by loosening the tensioner pulley. With the tensioner pulley, loosen the drive belt will come off and can be replaced.
How do you loosen a drive belt tensioner on a 2004 dodge neon?
Most likely use a socket and longer extension bar then loosen by pulling clockwise
How do you change a AC belt on 90 Acura?
You need to loosen the belt tensioner. There is a large bolt that needs to be loosened in the center of the tensioner pulley. Then the small vertical bolt is turned in the direction to loosen the belt. After the tensioner is loose replace the belt and retension it.
Loosen belt tension 2006 powerstroke diesel 6.0?
Use a 1/2" drive breaker bar in the tensioner.
How do you tighten the fan belt on a 1996 Ford Probe?
There is no "fan belt"; the 2.5L V-6 has two accessory drive belts, both with tensioners (loosen the large nut in the center of the tensioner pulley, and adjust the threaded adjustment rod), and the 2.0L I-4 has a single accessory drive belt with a tensioner (loosen the clamp bolt & adjust the threaded adjustment rod).
How do you replace the tensioner belt on a 2002 Chevy Trailblazer?
The serpentine belt is replaced by relaxing the tensioner arm using a big wrench or screwdriver. Then pop the belt off and slide the new one on. www.trailvoy.com Trailblazer enthusiasts with all the answers!
