The Nissan 240SX was brought to America in 1989.
The 1989 Honda Prelude had 4x100mm offset. The 1989 Nissan 240sx has a 4x114.3mm offset...so, it will not fit.
Yes it is, the Nissan 240SX was assembled in Japan and brought to America in 1989.
130 with ka24e
Nissan 240sx HorsepowerIt depends on what year and what engine the Nissan has, usually 1989-1990 have the ka24e which is 140 hp. While the 91-98 have the ka24de engine which has 155 hp.
The United States S13 is the 1989-1994 Nissan 240sx. This includes the hatchback, coupe, and convertable models. The United States S13 is the 1989-1994 Nissan 240sx. This includes the hatchback, coupe, and convertable models.
On 1989-1994 240SX, Top speed only goes to 115mph due to VSS. 240SX is not exactly known for topspeed but stability, and for the motor Torque since it was actually used for Nissan Trucks. 1997 Nissan Hardtop for ex.
>>"What type of valves does a 1989 Nissan 240SX have?" what exactly are you asking? the factory motor for the 240sx's, years '89-'90, is the KA24E, single cam, 2.4 liters, 12 valve. It has two intake valves, and one output valve.
yes any model of 240sx will be able to fit a sr20det as long as the harness is spliced to the old one of the stock ka. yes any model of 240sx will be able to fit a sr20det as long as the harness is spliced to the old one of the stock ka.
on the shifter the left hand side just under the shift button.
The IAT sensor is located on the air box. Team Clockwork Performance
http://forums.nicoclub.com/zerothread/253879 has factory service manual
The fuel filter is located under the hood on the back firewall, passenger side.
no adjustment of this clutch only a pedal freeplay adjustment
if it is the 4 lug its a 4x114.3..... if it has been converted to 5 lug= 5x114.3
there isn't a tensioner , there are pulleys that are adjusted by loosening the center bolt then loosening or tightening the bolt on the side.
On the 1989-1990 240sx with the KA24E single overhead cam engine the E.C.C.S. is located on the top left side of the engine behind the throttle body and on top of the intake manifold.
Yes the ecu will work. First disconnect the battery and connect the new one then reconnect the batter. Start up the 240sx and it should work it not it needs to be diagnoste goggle 1990 240sx ECU CODES FOLLOW THE STEPS AND THAT SHOULD WORK I know cause I'm using a 1992 ECU FROM Nissan Stanza. I was told it's alittle advanced on the horse power side and idle moves quicker.
Well if you look at the 240sx you will see that although the engine size is the same KA24E the engine on the 240sx is SIDEWAYS.
From 1989-1994 the 240sx were all the same, however I found out the hard way that some of the parts from different trim models are not 100% compatable. (i.e. parts from the coupe are not direct replacements for the hatchback) but if you are using parts from an 90 hatch with power windows/locks and trying to put them in an 89, the parts SHOULD fit w/o much trouble.
probably not, since 1989-1990 came with sohc ka24e motor not the dohc ka24de motor in the 1991 and newer versions