To lower the spare tire on a 2005 Lincoln Navigator, first locate the spare tire tool kit in the vehicle, usually found in the rear storage area. Use the provided wrench to turn the winch mechanism, which is typically accessed through a hole in the rear bumper or cargo area. Turn the wrench counterclockwise to lower the tire. Ensure you lower it enough to release the tire from the carrier before pulling it out.
On a Lincoln Navigator : The spare tire is under the vehicle , just forward of the rear bumper You can view the Lincoln Navigator owners manual ( various years ) online at : www . motorcraft service . com ( no spaces ) Click on Owner Guides ( in the Roadside Emergencies section you will find instructions , with drawings , on how to lower the spare tire in order to change the tire )
To remove the spare tire from a 2001 Lincoln Navigator, first, locate the spare tire winch mechanism, which is typically found under the rear of the vehicle. Use the provided tire iron to loosen the spare tire by inserting it into the winch socket and turning it counterclockwise. Once the tire is lowered to the ground, you can detach it from the winch and remove it completely. Be sure to store the winch mechanism back in its original position after the tire is removed.
Check Owner's Manual. If you do not have one. Check Related links below.
There should be a rubber grommet in the back bumper/rear license plate area. You simply stick the end of the tire iron or a long screw driver through the grommet and turn it. This will lower the spare tire to the ground.
In the trunk with the spare tire
On a 1999 Lincoln Navigator : Open the drivers door and on the latch pillar you will see an information sticker that shows the original tire size on the vehicle from the factory
To lower the spare tire on a 2003 Toyota Sequoia, locate the spare tire winch access hole in the rear cargo area. Insert the tire tool into the hole and turn it counterclockwise to lower the tire. Ensure you have the spare tire's retaining nut securely in place to avoid losing it while lowering. Once the tire is lowered to the ground, you can easily remove it from the winch.
To lower the spare tire on a Pontiac Montana, first, locate the spare tire tool, which is usually found in the rear storage area. Remove the cover or access panel to expose the spare tire mechanism. Insert the tool into the access hole and turn it counterclockwise to lower the tire until it reaches the ground. Once lowered, you can remove the tire from the vehicle.
To lower the spare tire you need to some tools and a jack. There is a cable winch holding the spare in place, so you will have to loosen it using your tools.
in the truck by the spare tire compartment
In the trunk next to the spare tire.
To lower the spare tire on a 2004 Yukon Denali, first locate the spare tire hoist mechanism, which is typically found under the rear of the vehicle. Use the provided tire iron or a similar tool to insert into the hoist access hole, usually found in the rear cargo area. Turn the tool counterclockwise to lower the spare tire until it is fully released from its holder. Once lowered, you can retrieve the spare tire for use.