0
What else can I help you with?
How temperature and pressure are related using the particle model?
Because
How is chocked nozzle thrust calculated?
Choked nozzle thrust can be calculated using the equation: F = mdot * ve + (pe - pa) * Ae, where F is the thrust, mdot is the mass flow rate, ve is the exhaust velocity, pe is the exit pressure, pa is the ambient pressure, and Ae is the exit area. This equation takes into account the momentum change of the exhaust gas and the pressure difference between the exit and ambient pressures.
What is a sentence using the word fountain?
There are many coins in the bottom of the fountain.
What is a simile using fountain?
the fountain was as beautiful as 5 rainbows put together
What are the best practices for using fountain cleaner to maintain the cleanliness and functionality of a fountain?
To maintain a clean and functional fountain, follow these best practices when using fountain cleaner: Read and follow the manufacturer's instructions carefully. Use the appropriate amount of cleaner for your fountain size. Regularly clean the fountain with the cleaner to prevent buildup. Rinse the fountain thoroughly after cleaning to remove any residue. Avoid using harsh chemicals that may damage the fountain.
What is a sentence using thrust?
i thrust out my hand and grabbed his shirt
Which has the least impact on the environment?
using a safe fountain for clean drinking water
How much pressure does it take for a pump to supply a drinking fountain with 300kPa if the fountain is 30.0 m above the pump?
The pressure required for the pump to supply the drinking fountain with 300 kPa is equal to the pressure due to the height of the water column. Using the formula P = ρgh, where ρ is the density of water (1000 kg/m³), g is the acceleration due to gravity (9.81 m/s²), and h is the height of the water column (30.0 m), the pressure required would be approximately 29.43 kPa.
Example of a sentence with the word fountain in it?
i have a fountain pen. The fountain looked very beautiful.
What is the balance piston used for a centrifugal compressor?
Due to the pressure rise developed through the impeller, a pressure difference exists across the hubs and covers such that the impellers have a net thrust in the direction of the compressor inlet. The balance piston counteracts that by being located behind the last impeller. This is accomplished by subjecting the outboard side of the balance piston to a low pressure from the inlet side of the compressor thereby creating a pressure differential opposite to the direction of the impellers. This pressure is acheived by connecting the area behind the piston to the inlet using a line. The impeller thrust not balanced by the balace piston is absorbed by the thrust bearings. I hope this helps
How do you reduse thrust to idol in flight simulator x?
If using a keyboard, you can reduce thrust to idle by pressing F1
How much thrust can be generated from a compressed gas cylinder?
there, In accordance with the question : It depends on how big the exhaust or the outlet hole is from the cylinder. The bigger the hole, the lower the thrust. But it doesnt mean that the hole should be extremely small. Its correct size deliver max thrust.
