Want this question answered?
One of the advantages of using Ultra Pure Lamp Oil is that it is environmentally friendly. It is odourless when it burns and is free of soot and smoke.
the homemade lava lamp is a mixture of oil and water as oil and water are insoluble in each other . we choose oil and water because they both have very same density .
Do not overfill the lamp bottle, check that the wick is long enough, the lamp seal must be tight from spillages and that when ending the experiment, use the cap to extinguish the flame, not using water or blowing the flame out.
Purple in blue water. DEFINITELY Purple in the Blue water. :)
Water, wax, and carbon tetrachloride.
This is a lamp using alcohol as fuel.
I turned on the lamp. Is that ok?
Take the lamp faucet ring out of the package. Clean the faucet opening. Using pliers twist the lamp ring onto the opening of the faucet clockwise. Once it is tight, turn on the water. The light should be activated and the water will change colours. Turn the water off. This should turn the light off.
One different use for lamp stands is taking it off the lamp and using it for a stand for something else. Another different use would be using a lamp stand for a lid.
A sodium lamp would not disappear when added to water. However the lamp would probably never be usable again.
What you need to make a homemade lava lampwatervegetable oilfood coloringGlitterSalt ( lots of it!)A flask that shows how much you need for example 200mlNow you pour water in too the flask (200ml). Put in the glitter (color of your choice, the glitter should float).Add the food coloring of your choice. ( a few drops is enough!)Add a few squints of veg oil.Now keep adding salt, this make it look like a lava lamp!
The benefits of using LAMP is that it easily integrates with your mobile devices as well as your computer at the same time.
Analysis of the materials indicate that the liquid is mostly water and the wax is mostly common paraffin wax. However, various ingredients have been added to both the water and wax to affect their densities and assist in the flow of the lamp. The exact compositions of these ingredients are considered by many of the manufacturers to be trade secrets.
probably to measure a lamp depending on if its a desk lamp or a stand up lamp, if you use a stand up lamp, i would suggest using either feet or inches
In a class 6th working model of the water cycle, you can demonstrate the process using simple materials like a glass of water, plastic wrap, and a lamp. Place the glass of water in a container, cover it with plastic wrap, and place the lamp over it. As the water heats up from the lamp, it evaporates, condenses on the plastic wrap, and eventually drips back into the glass, simulating the stages of the water cycle.
Samsung is using the BP96-00677A lamp in various of their televisions. Samsung is actually the only television producer using the BP96-00677A lamp to light their screens.
The old flammable water trick, eh? I can think of a way to do it... with some modifications to the lamp. It involves a small amount of sulfuric acid, some metal, ideally platinum, and a power source. Details are left as an exercise for the reader.