There are any number of ways to make a small hole in an egg.
Push Pin/Thumb Tack: The simplest way to make a hole in an egg is to use a push-pin (thumb tack). I use the sort with a long, colored plastic head as it provides a bitter grip. Push the sharpened tip slowly but firmly into the egg, and it will go right in.
The hole created in such a manner is fairly small. If you wish to enlarge it, you can use the tips of a small Phillip's head screwdriver. Simply insert the tip into the hole, and then twirl/rotate it. This will act like a drill/grinder and make the hole larger.
Blas-Fix: A second way is using one of the small hand drills included with each Blas-Fix blower. Hold the egg firmly in one hand, and press the tip of the drill firmly against the egg with the other. Once it has "seated" itself into the shell (you'll feel a slight pop), twirl the drill until it goes all the way through. The hole produced with one of these is a bit bigger, and the perfect size for using a Blas-Fix.
Reamer: A third option is to purchase a high-quality hand-held reamer, which is sort of like a fine drill with a handle similar to a screwdriver handle. The tip is very sharp, and you make the hole in the same way as with a push pin. Make sure to hold the egg firmly! Once the hole is started, you rotate the reamer back and forth to enlarge the hole. This works on small, fragile eggs on up to ostrich eggs. A reamer tool can be found at well-stocked hobby shops such as Dan's Crafts and Things in Rochester, New York.
X-acto Knife: Another inexpensive option is to use an X-acto knife, or just the #11 blade that comes to a fine point. Poke a hole in the center of the larger end of the egg with the sharp point of the blade. Then with a gentle twisting motion "drill" the hole to the desired size.
Dremel Tool: The high-tech way of making a hole is to use a Dremel (high speed rotary) tool. A Dremel is fairly expensive--it's not really worth buying just for this, but, if you have one around the house already, you can use it for this purpose. Use the cone shaped grinding attachment.
Hold the egg very firmly in one hand, and the Dremel tool in the other. The Dremel should be set at a medium to high speed, and turned on. Touch the tip to the spot you wish to make the hole, and apply very firmly. It will grind right through . If you do not hold it firmly enough, it will skitter across the shell of the egg and cause scratches/damage.
You get a hard boiled egg, and put a hole in it.
You use a thin knitting needle to make a small hole in both ends of the raw egg. Poke the needle inside to burst the yolk. Then gently blow through one hole until the insides of the egg has oozed out of the other hole, leaving an empty egg shell. You can now paint the egg shell as much as you want.
The Day They Shot a Hole in the Jesus Egg was created in 1989.
Take some eggs and get a sharp needle. Make a small hole in the top of each egg. Next, let the eggs sit in a warm place for about a week. Now you've got some rotten eggs that will only smell when you break them.
because when the sperm and egg meet they make one hole nucleolus. the sperm and egg have half a nucleolus and they are the only cell in the world to have only half a nucleolus.
Answer : HOW TO CUT A HOLE IN THE EGGThere are 2 ways you can use a knife to lightly tap the eggshell to remove it. #1: Hold the egg with your fingers, #2: pick up knife, #3: use the side of knife with no teeth and gently tap the egg at your 1/2 way point of the egg, it should start a cirular pattern around the egg, if after you have tapped the egg once and it does not make acrack all around the egg, continue this step until finished. This is called separating the egg. NOTE: This works better if the egg is cold.The second way is to tap the knife at one end of the egg to make a hole.
It means your egg is starting to hatch!
They find a caterpillar, paralyze ir, dig a hole in the ground, drag the caterpillar in the hole, lay an egg, close the hole. When the egg hatches it has plenty of food - the caterpillar.
push it through the hole
No. The golden egg is located in the sewer hole of Poptropica Towers.
Please help my alien has a hole in the back of it's neck and I don't know why
Eggs float because of trapped air inside the shell. As the egg ages it becomes more buoyant since liquids inside the shell evaporate and are replaced by air. If you have an egg that is really floating a lot than be careful. That egg could be rotten and breaking it open may be very smelly. If you wish to sink the egg, then make a small hole in the shell and allow water to get into the egg, replacing the air.