solar bottle bulbs are made with the following.
a) 1 litter rubber water bottle, colorless type
b) water
c) chlorine or bleach
d) sealant
procedure.
fill the bottle with water 80%, and complete the 20% with chlorine or bleach,
make a hole the size of the bottle in the roof, fix the bottle up right, half above the roof and half in the room, use the sealant to seal possible hole that water do not leak into the room also cover the cap of the bottle with the sealant to prolong its life from the sun,
you now have a solar bottle bulb of about 50- 60 watts, I am sorry you can only use it in the afternoon. for more information call my number, send an e-mail
Daniel Abalogu (234-809-179-5528)
To replace a solar light bulb, first make sure the light is turned off and then remove the old bulb by twisting it counterclockwise. Next, insert the new bulb by twisting it clockwise until it is securely in place. Finally, turn the light back on to test the new bulb.
Students of MIT (Massachusetts institute of technology). Although many give the credit to MIT student , the real inventor was ALFREDO MOSER, a mechanic, in 2002, the students of MIT improved on his work.
I think the word you are looking for is an atomizer. It is a perfume bottle with a small rubber tube with a squeeze bulb attached at the end and, when you squeeze the bulb it sprays the perfume.
i guess
To make a rope stay inside a bottle, you can tie a knot at one end of the rope that is larger than the bottle's opening, preventing it from slipping through. You can also use a cork or stopper to secure the rope inside the bottle. Another option is to melt the end of the rope slightly to form a bulb that is too large to pass through the opening.
Running solar panels directly on a 250-watt sodium bulb is not feasible because solar panels generate electricity from sunlight, while a sodium bulb requires a specific electrical supply to operate. However, you can use solar panels to power an appropriate electrical system that can then supply energy to a sodium bulb, assuming you have the necessary inverter and battery storage to manage the power requirements. This setup would involve converting the DC output from the solar panels into AC power suitable for the bulb.
Most light-bulb's would provide very little energy to a solar cell. Solar cells use a bandwidth that is not the main portion of a incandescent light bulbs output.
for the purpose of measuring the specific gravity
Use a water bottle and for the wheels use four water bottle caps and put a hole in the sides of the water bottle (use a big water bottle) and put holes in the caps too and use a straw to hold the wheels to the car and use tape to keep it all together. Good luck!
If you mean could you use the light from a bulb to energize a solar array or photovoltaic cell, the answer is yes. However the energy to run the bulb would exceed the energy produced by the array so you would have a net loss of energy in such a system.
Get a man who can
Sun Tech Solar Storm 24-bulb Tanning Bed has a seperate safe section.