0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How To Decide Whether To Use Metal Roofing Material?
Metal roofing materials aren’t a standard construction choice, but there are quite a few benefits to using a metal material for roofing as opposed to any of the more common asphalt based materials on the market. Understanding the benefits and disadvantages of metal roofing material is important when deciding how to roof a home, storage center, or a business. Here’s a bit of information to help you make the decision.First of all, metal roofing materials can withstand prolonged exposure to the elements better than asphalt based materials. They require less maintenance, and contrary to popular belief, metal roofing materials don’t rust if they’re properly installed and treated. There are quite a few painted metal roofing products on the market, and it’s possible to get a very aesthetically pleasing roof out of all metal components. However, metal roofs have a distinct look to them, and they won’t be mistaken for an asphalt roof. Be sure to look at a few different metal roofs to get a sense of their looks, especially if you’re considering a metal roof for a house or apartment building.Metal roofing materials require different installation tools than more popular roofing materials, so don’t assume that you’ll know how to install a metal roof just because you’ve worked on asphalt based roofs in the past. Many metal roofing material companies provide instructions for do-it-yourself roofs. Read these instructions before you make a purchase. This will help you to understand what you’re getting into. However, metal roofing materials aren’t inherently more difficult to install than other roofing materials. They’re simply different.If you’re using a contractor, make sure that the contractor has worked with metal roofing before. Ask about his credentials. Don’t use a contractor who isn’t experienced.Before you buy and use metal roofing materials, researhc the different options on the market and make sure that you’re getting the best deal possible. Metal roofing materials will cost a bit more than alternatives, but most come with extensive warranties or lifetime guarantees. A metal roof isn’t ideal for every project, but in many instances, a roof made out of steel or another metal can be a great asset.
What is scrap metal price?
Scrap metal price starts at .07 USD per pound and goes up from there. Bright copper can be sold for over $3.30 per pound near me! Scrap metal price is another way of saying what is the price of scrap metal? One needs to be specific when asking this quetion as there are many different types and grades of scrap metal. Scrap metal encompasses ferrous (iron, steel, HMS) and non ferrous (copper, aluminum, zinc, base metals, etc.) metals. There are also different grades of scrap metal, for example there s prepared steel, unprepared steel, copper #1, HMS #1 etc. Each commands a different price. There are many sites on line that post prices or check with your local recycler.
Who invented the metal clip?
Blake Stairhime. He lived in Hicksville,OH in the 1800's. He had a factory and he wanted to figure out a way to attach two pieces of paper together.
What is the importance of DC current flow instead of AC during electroplating process?
Electroplating involves moving metal from one electrode to another, through a conductive solution. Typically a metal at the anode will lose an electron, become dissolved in solution, and then move in the solution towards the cathode. Once reaching the cathode, the metal ion gains electron(s) and is thus deposited at the cathode. With AC, the metal ions would just move back and forth in the solution, generating heat but no electroplating.
What is the floating input in IC?
I believe what you are referencing is when a pin to an IC is left with no connection. Depending on the application, often an input(s) or an output(s) is not used. In such a scenario it is good practice, and in the case of CMOS devices necessary, to tie the unused pin(s) to logic high or low using pull-up or pull-down resistors. The choice of tying to high or low will be dictated by the application and the IC's data sheet will offer guidance.
What has the author William Neubecker written?
William Neubecker has written: 'Home instruction for sheet metal workers' -- subject(s): Sheet-metal work 'Sheet-metal work' -- subject(s): Sheet-metal work 'Automobiles & Sheet Metal Boats' 'Sheet-metal work' -- subject(s): Sheet-metal work 'Home instruction for sheet metal workers' -- subject(s): Sheet-metal work 'Sheet-metal work' -- subject(s): Sheet-metal work 'Short patterns, kinks and quick methods for sheet metal workers, time, labor and material saving procedure' -- subject(s): Sheet-metal work 'Antique automobile body construction and restoration' -- subject(s): Automobiles, Bodies, Collectors and collecting
What has the author James S Daugherty written?
James S. Daugherty has written: 'Sheet Metal Pattern Drafting and Shop Problems' 'Essentials of Sheet Metal Work and Pattern Drafting' 'Sheet Metal Pattern Drafting and Shop Problems' -- subject(s): Sheet-metal work, Patternmaking, Pattern-making
What has the author F S Kidder written?
F. S. Kidder has written: 'Triangulation applied to sheet metal pattern cutting' -- subject(s): Patternmaking, Sheet-metal work
What has the author W Watkins written?
W. Watkins has written: 'Sheet metal fabrication' -- subject(s): Sheet-metal work
What has the author Ralph D Widdowson written?
Ralph D. Widdowson has written: 'Sheet metal as an area of industrial arts instruction in Pennsylvania public schools' -- subject(s): Sheet-metal work
What has the author Jianjun Zhai written?
Jianjun Zhai has written: 'Ban liao he xing cai de chong ya yu cheng xing ji shu' -- subject(s): Sheet-metal, Sheet-metal work, Punching (Metal-work), Metal stamping
What has the author Cliff Kuhn written?
Cliff Kuhn has written: 'Generations of sheet metal craftsmanship' -- subject(s): Central Georgia Sheet Metal Contractors Association, Sheet Metal Workers' International Association, Sheet Metal Workers' International Association. Local no.85 'Contesting the new South order' -- subject(s): Case studies, Cotton manufacture, Fulton Bag and Cotton Mills Strike, Atlanta, Ga., 1914-1915, History, Industrial relations, Strikes and lockouts
What has the author Leroy J Blinn written?
Leroy J. Blinn has written: 'A practical workshop companion for tin, sheet iron and copper plate workers' -- subject(s): Sheet-metal work, Workshop recipes, Metal work, Metal-work
What has the author Max William Pehl written?
Max William Pehl has written: 'New book of instruction and tables for use with the everready pipe and elbow chart (designed for sheet metal and boiler workers)' -- subject(s): Pipe, Sheet-metal work
What has the author Gerhard Oehler written?
Gerhard Oehler has written: 'Die hydraulischen Pressen' -- subject(s): Hydraulic presses 'Gestaltung gezogener Blechteile' -- subject(s): Sheet-metal work, Deep drawing (Metal-work) 'Universal-Schnitt- und Stanzwerkzeuge' -- subject(s): Metal-work
What has the author B W Butler written?
B. W. Butler has written: 'Die and press-tool work' -- subject(s): Dies (Metal-working), Sheet-metal work, Tools
What has the author Wayne Andrew Sisson written?
Wayne Andrew Sisson has written: 'X-ray studies of rolling and heat treatment of sheet metals' -- subject(s): Metallography, Sheet-metal, X-rays
