hey!
You will need the following things :
1) a hollow glass tube or a eye dropper
2) a big glass bottle
3) a bottle of vinegar
4) a box of baking soda
6 ) a rubber or cork stopper that fit the big bottle
7) paper towel and a rubber band
8) water
First thing to is remove the rubber squeeze bulb on the eye dropper and keep the glass tube
and make a hole slightly smaller than the glass tube in the rubber or cork bottle stopper and insert the glass tube in the stopper until the tip of tube come out of the stopper . ( Do this slowly ; so not to break the glass)
Put baking soda on the sheet of paper towel and attract the corners to the other end of the tube to the rubber stopper securing with the rubber band
than fill the big bottle: 1/3 full of vinegar and the other 1/3 with water leaving the bottle about half full
Than carefully insert the rubber stopper on the big bottle with the bag of soda hanging above the vinegar water solution. Make sure it a tight seal on the bottle
when you ready to use
Tip the bottle over and wait a minute or two than the water will shoot out of the tip
and you have a working Fire extinguisher
I hope this help
You can make over 200 words just from "extinguisher". so "gator fire extinguisher" would have many more than that.
A fire extinguisher tech makes around $32.52 an hour. All fire extinguishers are designed to put out fires. A Dry extinguisher uses a powder or gas rather than a liquid and someone gets paid to make these.
The first thing you must do is make sure you can get out safely if you are unable to stop the fire with the extinguisher. The second thing is to determine what type of fire it is so you choose the proper type of fire extinguisher. Do not consider a fire extinguisher if the fire is more than waist high or larger than 10 square feet -- leave immediately. The next thing is to get between the fire and your primary exit and use the extinguisher on the fire.
it compress's the fire till it go's out
To check if your fire extinguisher is working properly you should check the plastic seal holding the pin in the handle. If it has been removed or tampered with you should contact your local fire department. Also, check the gauge and the weight of the fire extinguisher, if it is not full, you will have to get it recharged. If you are looking to purchase one for your home, Home Depot and Sears carry them, along with other stores like them.
Fire extinguisher and a refrigerator
how to make working model of industries
Get the extinguisher and have a good grip on it, pull the pin out of the handle, pull the hose/pipe/tube out if it has one, aim towards the center of the fire. Also, please make sure you are using the proper extinguisher type.
Uncharged fire extinguisher
Aim the fire extinguisher at the base of the flames, and sweep back and forthMore specifically:Trigger the fire alarm if not already done.Have others leave the area.Make sure you can get out safely and not be trapped.Select a fire extinguisher type according to what is burning.Pull the pinAim the nozzle at the fuelSqueeze the handleSweep from the edges toward the centerRepeat, as necessary, with another extinguisher, if you have one.
There are a few ways to make an English working model. The exact model details depend on the type of English working model you want.
It is necessary to receive this training as it helps to prepare you in case a real fire would break out and the use of a fire extinguisher would be essential. The OSHA make it necessary for employers to ensure this training takes place.