pencil lead is not charcoal but rather graphite molded with clay and hardened
Graphite is the mineral that is used to make the lead in a pencil. Despite its name, pencil "lead" is actually composed of graphite mixed with clay.
No
5- two by using the lead point of each pencil and 3 by using one lead point and the eraser end.
To make a bullet pencil, you need a bullet casing (typically a spent cartridge), a pencil lead insert, and a means to secure the lead inside the casing. Start by carefully removing the primer and gunpowder from the bullet casing for safety. Then, insert the pencil lead into the casing, ensuring it's snug, and seal the open end with a cap or a small piece of rubber or cork to hold the lead in place. Finally, sharpen the lead using a pencil sharpener or a knife to create a usable point.
Compressed colored lead sticks can be used in mechanical pencils that are designed to accommodate them. Simply insert the lead stick into the pencil, making sure it is securely in place, and then use the pencil as you normally would to write or draw. Make sure to advance the lead as needed using the pencil's mechanism.
A "pencil lead" is a mixture of the graphite allotrope of carbon mixed with clay and baked hard. While a pencil lead will conduct electricity, it can not be used to make a light bulb.
With wood and lead
Graphite is the mineral that is used to make pencil lead. It is a form of carbon that is known for its ability to make marks on paper.
Your pencil lead may be breaking because you are applying too much pressure while writing or drawing. Try using a lighter touch to prevent the lead from breaking. Additionally, make sure your pencil is sharp and not worn down, as a dull tip can also cause lead breakage.
To make ink using charcoal, grind the charcoal into a fine powder. Mix the charcoal powder with a binding agent like water or gum arabic to create a paste-like consistency. Adjust the thickness by adding more or less of the binding agent based on your preference.
Once the fire burned down, only the charcoal remained.
It is possible using activated charcoal.