You take the weight of the tank and divide it by the number of square inches that touch the floor. If you have a 400 pound tank sitting on a stand with four legs of 1 square inch each, the tank would be exerting 100 pounds per square inch. If the same tank is setting on the floor and has a footprint of 10 inches by 20 inches, it would be 2 pounds per square inch.
This involves Newton's third law of motion; for every force there is an equal and opposite force. If your weight is 140 lbs, then you're exerting 140lbs of force on the floor. In response, the floor is exerting 140lbs of force on you.
sonar
Usually the cost of radiant floor heat are about $5-$7 just for materials a square foot and a DIY approach. For a professional installation one has to count on $8 - $12 a square foot.
Square root of 2gh
All of the person's weight is concentrated into the small area of the bottom of the heel.100 pounds pressing on a heel with a 1/2 square inch area produces 200 pounds of pressure per square inch-- enough to make a dent. whereas a 200-pound man whose heels have a 6 square inch area, produces only 33 pounds per square inch against the floor.The majority of your body weight is carried by your heels. With a standard shoe it has more surface area to disipate your bodies weight over a larger area. When wearing high heels the surface area is dramatically reduced and total weight is focused on such a small point. Most floor installers will recommend not wearing pointy heeled shoes on soft composite floors.
This involves Newton's third law of motion; for every force there is an equal and opposite force. If your weight is 140 lbs, then you're exerting 140lbs of force on the floor. In response, the floor is exerting 140lbs of force on you.
It is difficult if not impossible to convert pounds to square feet. The units pounds are used to measure mass and square feet measures area. If you were looking at something like floor tile, which weighs "X" per square foot, it may be possible to calculate and find an answer. As it is, though, we're stuck.
Measure the area on the plan and multiply by the square of the scale.
125 square feet.
In the US, square feet. In most other countries, I would presume, square meters.
Measure the height of the wall from floor to ceiling. Measure the width of the wall. Multiply height x width = square footage. For square yards, divide the square footage by 9.
1600 square cm
Imagine a square box laying on the floor, and all the sides are one meter in length. You will have a square that is 1m^2 or one square meter.
"Gallon" is a unit used to measure volume or capacity, as of a bottle or a bag. "Square meter" is a unit used to measure area or coverage, as of a bedroom floor or a garden plot. The two units have different dimensions and are used to measure different quantities. Neither one can be converted into the other one. It would be like trying to convert your age into pounds.
Measure the length X width of each floor and add them together.
960
This is not a correct conversion. Cubic feet is a measure of volume while square feet is a measure of area.