You have a meter stack installed.
In the USA the National Electrical Code prohibits the "point of attachment" of an overhead electric service to be within 36 inches of an openable window, doorway, or porch... in other words they do not want a person to be able to reach out of a building opening and be able to touch exposed live power wires. I believe this rule applies to all buildings not just residential. The "point of attachment" is the area near the top of the building's electrical conduit where the building wires are spliced to the utility company wires. This is the only area where there should be exposed power wires. There is no distance limitation from windows and doors for the remainder of the electrical service that has no exposed power wires, such as the conduits, meters, panels
When measuring current yes, definitely. When measuring voltage I would guess yes but it may be affected by the resistance inherent within each meter.
clamp is an electrical device having two jaws which open to allow clamping around an electrical conductor. This allows properties of the electric current in the conductor to be measured, without having to make physical contact with it, or to disconnect it for insertion through the probe.
60Hz has a wavelength of 5000 meters.
1awg
The Burj Khalifa, located in Dubai, is 829.8 meters tall. This makes it the tallest skyscraper in the world. The building was completed in 2009 and contains over 900 apartments.
what is the total internal Square Metre space of the entire block of apartments?Internal Length of building: 23 metresInternal Depth of Building: 7 metresNumber of floors: 4Someone left this as the answer! Guess I will continue to observe.23*7*4*11=7 08423*7=161 square meters per floor161*4floors=644 square meters for the entire building.644square meters / 11 apartments = 58.5454... square meters per apartment.since there are 11 flats and 4 floors, each or some flats must have different floor plans with different measurements because 11 / 4 = 2.75You probably do not have 2.75 flats on each floor.However, if the building had a total of 12 flats the numbers would be...23*7=161 square meters per floor161*4floors=644 square meters for the entire building.644square meters / 12 apartments = 53.666... square meters per apartment.And if there would be 12 flats and 4 floors, each flat could have the same floor plan with the same measurements because 12 / 4 = 33 flats on eacn floor is much more convenient. Otherwise you will need to measure each flat individually.Simple math, you just have to get the formula right.
5 meters
5 meters
72.6 meters.
Meters.
0.031
A storey is one level of a building - there is no set height. It can range from just less than 3 meters to more than 5.
Electric companies calculate the amount of electric energy by using special consumption meters.
yes
Electric meters measure kilowatt hours.
what is the answer