Best Answer

A large hammer and a chisel or a cutting torch.

User Avatar

Wiki User

10y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you open a coin box on a washer without keys or a lock pick?
Write your answer...
Still have questions?
magnify glass
Continue Learning about Physics

How does a strap lock mechanism work?

Strap locks work by means of a washer. A washer is placed in the narrow, tapered end of the strap button. The wide, outside tapered end of the strap then prevents the washer from slipping, as it is screwed tight.

Does the water levels determine the ship to float?

No. A ship going through a lock gets raised or lowered several meters, without any effect on its ability to float.

How do you open a wire lock without a key?

Opening a lock, specifically a freestanding padlock, without a key is something that many people would like to learn how to do. Whether it's the satisfaction in knowing how to pick a lock or a more practical matter, like never being out of options when you forget your key, doesn't matter. The point is that knowing how to pick a lock is a skill that should be used responsibly and legally on only your own property.1. Unbend one arm of the paperclip. Once the single piece of metal (roughly an inch long) is straight out, bend a small, 45-degree angle near the tip so it looks like a hook.2. Press the paperclip arm into the lock. The hook should be facing up in the direction of the teeth of the key, and the bottom of the arm should act as the base of the key would.3. Gently work the paperclip all the way into the lock. Once the paperclip gets to the back of the lock, push up so the hook is pushing against the top of the lock. Then grip the part of the paperclip that's not bent and turn the paperclip as you would a key. This may take a few tries, but do so gently so you don't twist or break your paperclip lock pick.

What passing through a lock which light means approach the lock under full control?

amberWhen passing through a lock, an amber light means “approach the lock under full control."

What is a lock screw?

It is a low profile, approx. 2" elliptical shaped device that screws to the top frame of a gazebo canopy at prescribed intervals. The matching canopy grommet is placed over it and the small knob on top of the lock is rotated 90 degrees to lock the canopy in place