sledge hammer! ftw
hammer
Hard to open a glove box that doesn't exist. because the mk3 jetta doesn't come with a glove box.
The handle pin is broken so you just have to pull on the plastic handle down to take it out. You will see a spring on the box. Just push down on the spring and it will open the glove box.
To open a broken glove box on a 1988 BMW, first check if the latch is stuck or obstructed; gently tug on the handle while applying pressure to the glove box door. If that doesn't work, you may need to remove the screws securing the glove box to access the latch mechanism. Alternatively, you can use a flathead screwdriver to carefully pry open the glove box if it’s not fully broken. If all else fails, consider consulting a mechanic or a BMW specialist for assistance.
break it more
I dont know what you mean by broken but if the handle i broken off and there is just a space where the handle would go, you can definitely open that, mine is like that. First you put your finger inside the space and you will be able to feel 2 pins or something, one will be facing right and one left, they have a gap between them. You press them both at the same time and it will open. Hope that helps
I had the same problem with my 1995 LHS. The only remedy is to carry a set of pliers in your glove box. I replaced the cable handle once but it broke again.
To replace the glove box handle on a VW Beetle, first, open the glove box and remove any contents. Then, locate the screws or clips securing the handle to the glove box door and remove them. Once the old handle is detached, position the new handle in place and secure it with the screws or clips. Finally, test the handle to ensure it operates smoothly before closing the glove box.
The door handle may not open because it could be locked, jammed, or broken.
You will need to remove the screws holding the glove compartment on the Mini Cooper in order to open it with a broken lock mechanism. There are 5 torx screws holding it in place.
latch broke- http://www.dubdiy.net/interior/bb.html == == get creative, maybe remove door from where it is mounted by the hinges..? good luck :)
To remove the glove box handle on a 1992 Mercury Capri, first open the glove box and locate the screws securing the handle. Use a screwdriver to remove these screws. Once the screws are out, gently pull the handle away from the glove box to detach it. If necessary, check for any clips that may need to be released to fully remove the handle.