Acura Integra
Toyota RAV4
VW Jetta

How do you open the glove box 2001 integras when the lock is busted and the handle is broken?

131415

Top Answer
User Avatar
Wiki User
2009-07-18 00:02:57
2009-07-18 00:02:57

hammer

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

The handle pin is broken so you just have to pull on the plastic handle down to take it out. You will see a spring on the box. Just push down on the spring and it will open the glove box.

User Avatar

I had the same problem with my 1995 LHS. The only remedy is to carry a set of pliers in your glove box. I replaced the cable handle once but it broke again.

User Avatar

if it has already been broken in you cant break it in again. ur going to have to buy a new glove or just use a glove that's been broken in poorly

User Avatar

I dont know what you mean by broken but if the handle i broken off and there is just a space where the handle would go, you can definitely open that, mine is like that. First you put your finger inside the space and you will be able to feel 2 pins or something, one will be facing right and one left, they have a gap between them. You press them both at the same time and it will open. Hope that helps

User Avatar

Sure. A softball glove is made of the same materials that a baseball glove is made of (high grade leather). They need time to be broken in. Oiling the glove will help with this process.

User Avatar

latch broke- http://www.dubdiy.net/interior/bb.html == == get creative, maybe remove door from where it is mounted by the hinges..? good luck :)

User Avatar

If you want to oil a new glove you should go to a sporting goods store and buy some glove oil or conditioner then you apply it the way it instructs then you can shape the glove after you do this it will help clean and restore the glove to feel like new but still broken in.

User Avatar

You will need to remove the screws holding the glove compartment on the Mini Cooper in order to open it with a broken lock mechanism. There are 5 torx screws holding it in place.

User Avatar

Right side of the glove box is a pull down handle

User Avatar

in the back of the glove box, should be a handle to pull.

User Avatar

broken baseball bats,emty water bottle,worn out glove,mest up baseball,broken helmet

User Avatar

Leather quality, pro preferred retains shape, gold glove is pre broken in so it loses its shape easily, price, overall quality.

User Avatar

Generally speaking a new baseball glove is "stiff" and needs to be "broken in" There are several ways to accomplish this and one way is not to place it in an oven.Techniques to properly break in a new baseball glove are to:Daily rub the glove gently with olive oil;After that, place a baseball firmly in the center of the glove and fold it over the ball. This makes a "center" place in the glove where most of caught balls fall into;Practice catching ball with the glove each day and begin to feel the glove gain some softness. The glove should feel comfortable on your hand.For the most part, a new baseball glove can be "broken in" in a week to ten days.Each player has his/her own way on this procedure, but to answer the question, no, a glove is never placed in an oven.

User Avatar

I don't know the answer but any glove box lock is a joke. I would just replace it but never lock it.

User Avatar

The bulk of the value of a collectible baseball glove will rely on the player that endorsed it. Without a player endorsement the glove will have a low collectors value, and will rely on vintage baseball glove features. The age and style of the glove will be a factor, as well as condition. Dry leather, loose or broken laces, and writing on the glove will bring the value down.

User Avatar

Under the glove bo there's a red handle, pull it towards you.

User Avatar

Look up under the handle and there's a hole perpendicular to the front of the glove box. Insert a small screw driver about an inch into the hole and pry gently towards the back of the truck which should release the glove box. It takes some encouragement, but remove the 2 screws holding the latch (from the inside of the glove box) and the latch should come free out the front.

User Avatar

Probably Rawlings. I got a Rawlings glove and i hate it i've had it for three months and it still isn't broken in. I HATE IT

User Avatar

Normally, a locking cylinder is held in by a clip on the back side. You pass the cylinder through the hole in the glovebox and then inside the glovebox you slide a clip over the cylinder to hold it tight to the inside of the glove compartment door. Maybe you just need to the clip. It may have broke. You shouldn't need a whole glovebox door and all unless the part on the glovebox door is broken where the clip attaches to it. Then you may need just the door.

User Avatar

The bulk of the value on a collectible baseball glove relies on the player that endorsed it. Without a player endorsement the glove will have a lower collectors value and will rely on vintage baseball glove features such as the style of the web. Condition is also important. Flaws such as broken laces, dry leather, and writing on the glove will lower the value.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.