Only do this with a cold engine! Hot coolant will scald you!
1. Partially drain cooling system until coolant is below thermostat housing level.2. Disconnect hose from thermostat housing.3. Disconnect electrical connections from coolant temperature switch.4. Remove bolts securing housing.5. Remove thermostat.Refit:1. Clean off old gasket from housing and/or engine.3. Install new thermostat with copper element(spring) towards engine.(Note: If your thermostat has a hole in the ring, install with hole at the top(12 noon) position)4. Install new gasket.5. Install housing.6. Install hose and clamps.7. Install electrical connection(coolant temperature switch).8. Refill coolant to proper level.9. Check for leaks. Retighten as necessary.
located on the passenger side of the engine compartment next to the radiator and near the battery enclosure. It's white and has 3 hoses attached to it.
Its on the housing directly behind the waterpump.
Land Rover Discovery was created in 1989.
Where the hose runs into the Engine behind the Distributor
Why is Land Rover Discovery so noisy
maybe!
There is not transmission dipstick on the 2001 Land Rover Discovery.
There are many places where one can find a Land Rover Discovery. One can find a Land Rover Discovery at popular on the web sources such as eBay Autos and Auto Trader.
You can Purchase the Land Rover Discovery at any Land Rover Dealership . Among the states that have these dealerships are Alabama, Arkansas and Arizona.
To fit a thermostat on a 2002 Land Rover Discovery, first, ensure the engine is cool and disconnect the battery. Remove the engine cover and drain the coolant from the radiator. Next, locate the thermostat housing, typically found near the top of the engine, and unbolt it to access the thermostat. Replace the old thermostat with the new one, ensuring the gasket is in place, reassemble the housing, refill the coolant, and reconnect the battery.
Its under the drivers seat. 2004 Land Rover Discovery HSE 4.6L
how to bleed fuel filter on land rover discovery 3