8ml
Dissolve 30-40 g of sodium chloride in 1 L of water.
637.5 g h20. 40%=(425/425+g) and solve.
Dissolve 0.4 g of NaOH in 100 ml of water. Try it out. Actually it is not suitable to prepare NaOH solutions in standard flasks.It should be made in beakers & must be standardised..This is done to find the correct normality...
Preparation of standards Prepare a stock uric acid solution of 100 mg/L. Dilute it to give working concentrations of 10, 20, 30, 40, 50 and 60 mg/L. Procedure:1 Prepare a 100 mg/L stock solution of uric acid Weigh out 100 mg uric acid, transfer it to a 1 L volumetric flash, add about 900 ml distilled water, and then add about 100 µl of 0.6 N NaOH to help dissolve the uric acid. Make up to the volume with water when uric acid is fully dissolved.2 Dilute the stock solution to give working concentrations of 10, 20, 30, 40, 50, 60 mg/L. To prepare 50 ml of the working standards 5, 10, 20, 30, 40, 50 mg/L respectively, weigh 10, 15, 20, 25, 30 g of stock solution into 50 ml volumetric flasks and make up to volume with distilled water.
Usually it means a 40% solution of Urea.
40 grams, this is the 1M NaOH standard laboratory solution.
Dissolve 30-40 g of sodium chloride in 1 L of water.
The atomic weight of Na-OH is 23+16+1= 40. So to prepare the one N solution of Na-OH, you need to add 40 grams of Na-OH in one litre of water. To prepare the 4N Na-OH solution, you need to add 160 grams of Na-OH in one litre of water.
637.5 g h20. 40%=(425/425+g) and solve.
Formalin is 40% solution of formaldehyde not an acid.
x = 40
Its $16 solution: $40*40/100 = $16
Dissolve 0.4 g of NaOH in 100 ml of water. Try it out. Actually it is not suitable to prepare NaOH solutions in standard flasks.It should be made in beakers & must be standardised..This is done to find the correct normality...
Preparation of standards Prepare a stock uric acid solution of 100 mg/L. Dilute it to give working concentrations of 10, 20, 30, 40, 50 and 60 mg/L. Procedure:1 Prepare a 100 mg/L stock solution of uric acid Weigh out 100 mg uric acid, transfer it to a 1 L volumetric flash, add about 900 ml distilled water, and then add about 100 µl of 0.6 N NaOH to help dissolve the uric acid. Make up to the volume with water when uric acid is fully dissolved.2 Dilute the stock solution to give working concentrations of 10, 20, 30, 40, 50, 60 mg/L. To prepare 50 ml of the working standards 5, 10, 20, 30, 40, 50 mg/L respectively, weigh 10, 15, 20, 25, 30 g of stock solution into 50 ml volumetric flasks and make up to volume with distilled water.
40 tablets of 250mcg each to equal 10mg
The greatest factor of 40 is itself
It is: 40+(-11) = 29