pl. suggest how to prepare 50 sulphuric acid
If you boil the said mixture, and the sulphuric acid concentration is at least 50%, the silver will dissolve.
50% citric acid powder = 50 g citric acid/100 g 4% citric acid solution = 4 g citric acid/100 ml distilled water Determining how much citric acid powder to use is based upon how much citric acid solution you wish to make. To make 100 ml of solution, you should use 8 g of powder.
Dissolve slowly 50 g NaOH in 100 mL water; advertisement: sodium hydroxide solution is dangerous !
MATERIALS AND SOLUTIONSFAA (Formalin-Acetic-Alcohol) (100 ml)Ethyl alcohol ------------------------------- 50 mlGlacial acetic acid -------------------------- 5 mlFormaldehyde (37-40%) ------------------- 10 mlDistilled H2O ------------------------------- 35 mlMix them and shake well.
Add no more than 2 ml concentrated nitric acid slowly to 98 ml ethanol (industrial methylated spirit). Label the solution highly flammable but do not store longer than a week
Preparation of standards Prepare a stock uric acid solution of 100 mg/L. Dilute it to give working concentrations of 10, 20, 30, 40, 50 and 60 mg/L. Procedure:1 Prepare a 100 mg/L stock solution of uric acid Weigh out 100 mg uric acid, transfer it to a 1 L volumetric flash, add about 900 ml distilled water, and then add about 100 µl of 0.6 N NaOH to help dissolve the uric acid. Make up to the volume with water when uric acid is fully dissolved.2 Dilute the stock solution to give working concentrations of 10, 20, 30, 40, 50, 60 mg/L. To prepare 50 ml of the working standards 5, 10, 20, 30, 40, 50 mg/L respectively, weigh 10, 15, 20, 25, 30 g of stock solution into 50 ml volumetric flasks and make up to volume with distilled water.
A 50 ml solution that is 10% acid will consist of 5 ml of acid (10% of the volume) and 45 ml of water (90% of the volume). You're not adding any water, but you want to add enough acid to make a solution that is 50% acid and 50% water. You will need to have a total of 45 ml of acid in the mixture to make it a 50/50 solution, since the amount of water is also 45 ml. You have 5 ml in there already, so you would need to add 40 ml of acid. That would make a total 90 ml solution that is 50% water (45 ml) and 50% acid (45 ml).
If you boil the said mixture, and the sulphuric acid concentration is at least 50%, the silver will dissolve.
50% acid in a 6 gallon solution means that 3 gallons are acid. 9 gallons more acid will give you a total of 12 gallons of acid in a 15 gallon solution. 12 is 80% of 15.
6 litres of 50% + 4 litres of 25%
50% citric acid powder = 50 g citric acid/100 g 4% citric acid solution = 4 g citric acid/100 ml distilled water Determining how much citric acid powder to use is based upon how much citric acid solution you wish to make. To make 100 ml of solution, you should use 8 g of powder.
Assuming the given solution is 50% w/w, we add equal amounts of water and KF so as to get the solution in desired quantity.
Dissolve slowly 50 g NaOH in 100 mL water; advertisement: sodium hydroxide solution is dangerous !
pH less than 7
mary mixed 2l of an 80% acid solution with 6l of a 20% acid solution. what was the percent of acid in the resulting mixture
In order to reduce the percentage of acid from 80% to 50%, you would need to add another 36 kg of diluent (e.g. water).
t = number of liters of 30% acid solution s = number of liters of 60% acid solution t+s=57 .30t+.60s=.50*57 t=57-s .30(57-s)+.60s=.50*57 .30*57 -.30s +.60s = .50*57 .30s = .50*57 - .30*57 = .20*57 s = .20*57/.30 = 38 liters of 30% solution t = 57 - s = 57-38 = 19 liters of 60% solution