You should not need to. The fuel will get to the engine in a few revolutions. If not, you have no fuel flow.
by priming i assume you mean its a diesel and no a few revolutions wont kick it over. You will potentially need to crack injector lines by loosening the nuts at the injector, cranking it over on 20 second cranks with 2 minute breaks until fuel flow out at each nut. Once it begins to flow at the nut, you can tighten that one down. Repeat until all injector nuts are right and then you will be primed. Electric pumps eliminate this problem but have their own problems. Ensure you have proper fuel pressure at the filter head, should be around 5-7 psi. If you dont, the fuel pump on the passenger lower side of the block might be on its way out. test it, and if needed replace it, they are cheap.
No because they are 2 compleatly diffrent body styles
yes it should
No, the 2003 Ford F350 rims will not fit on a 1999 Ford F350.
Yes, the rims off a 2002 Ford F350 will indeed fir on a 1999 Ford F350.
no changed in 2003
Miles per gallon of Ford F350 is about 14.
Were can you find a fuse diagram for a 1988 ford F350
How do you change the alternator on a 1996 ford F350 diesel
where is the fuel pressure regulator 2006 ford f350
The F350 is a two axle vehicle.
where is the vin located on a ford f350 frame 1989
The gross vehicular weight of a 1993 F350 is approximatelyÊ18,500 pounds. It has a towing capacity of Êabout 21,500 pounds.