0
How do you produce fabricated bends in trunking and tray work section material?
Wiki User
∙ 9y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
4 How does the type and direction of stress applied affect the selection of the material and the cross section?
12
What affects the resistance of a cunductor?
The resistance of a material depends on:-The material itself.Length of the conductor.Area of cross section of the conductor.Temperature.
What is the meaning of stacking factor of a transformer?
it s the ratio of net cross section occupied by the magnetic material to the gross cross section of the core generally, its value s between 0.5 to 0.95
What is difference between shearing stress and crushing stress?
Tension stress tends to pull a material apart and acts normal to its cross section plane. Shear stress tends to shear a material apart and acts in the plane of its cross section plane. Crushing stress tends to push a material and acts normal to its cross section plane, in the opposite direction of tension. Crushing stresses are compressive stresses and could also be bearing stresses. For a material laoded in pure tension, shear exists at 45 degrees along the cross section plane and is 1/2 the tensile value. For pure shear, tension exists 45 degrees along the cross section plane and is equal to the shear value. Most all metals are stronger in tension than in shear, by a factor of about 1.7. Some materials, like chalk or concrete, are stronger in shear than in tension. If loaded in shear, they will break intension 45 degrees along the cross section
How do you measure the resisting bending moment of a reinforced channel frame?
The resisting bending moment is the product of the yield strength (of the beam material) and the section modulus of the beam. The RBM thus combines the material attributes as well as the geometric attributes of the beam and gives a useful metric to compare different beams irrespective of material or sectional geometry.
How do you produce fabricated bends in trunking and traywork section material?
by bending the materials
What materials come under the heading fabricated structural metal?
This includes material for bridges, buildings section for ships, boats and barges and can include metal doors and trim.
How many meters of trunking did Unitrunk supply to Dubai Airport Baggage Handling section in 2008?
200,000 metres.
Which section of a material safety data sheet wold you find proper extinguishing media for material involved in a fire?
You would find the proper extinguishing media for material involved in a fire in section IV of the Material Safey Data Sheet. This section is labeled as Fire and Explosion Data.
What are the material found in each section?
1.reference section, 2.research book section 3.pilipiniana section 4.periodical section
Where do you get pomegranates?
In the produce section of grocery stores.
How can resistence of a wire be minimised?
Make the length shorter; make the cross section bigger; choose a material with a low resistivity.Make the length shorter; make the cross section bigger; choose a material with a low resistivity.Make the length shorter; make the cross section bigger; choose a material with a low resistivity.Make the length shorter; make the cross section bigger; choose a material with a low resistivity.
Why does The rear section of an exhaust system normally failes before the middle and front section?
The material used for this section are untreated
What is the unit weight of 60x40 mm box section?
It depends on the material from which the box section is made.
How do you make a sentence using produce?
Cleanup crew to the produce section, please. This team is dedicated to showing an increase in whatever we produce!
What is a unit in geometry?
A section; a category w/ similar material in it. *+~+*
What does Sacramento produce the most?
It is the capital of California; in the Northern section of it.
