Disclaimer Keybits Lock & Key is in no way responsible for how this information is used. It is provided for educational purposes only, and all work should be done by a professional locksmith. 1998+ Chrysler, Dodge 1999+ Jeep Add Key (Must have two Programmed Sentry Keys) 1. Put one of the two current keys into the ignition and turn to the ON position. 2. After the key has been in the ON position for at least three seconds, but no more than 15 seconds, turn the key back to the OFF position. 3. Take the key out, and put in the second current key, turning it to the ON position, all within 15 seconds. The second key cannot be the same as the first key. 4. After ten seconds, a theft alarm light will illuminate and a single chime will sound. This confirms entry into "Customer Programming Mode." 5. Within 60 seconds, turn key OFF and remove the current key. 6. Put a new key into the ignition and turn to the ON position. 7. After ten seconds, a single chime will sound. The theft alarm light will turn off. Wait three seconds and turn key OFF. 8. Repeat these steps for additional keys.
nothing works and I replaced the battery. to the fob
You have a failure with the key or the computer that senses the chip in the key.
The Chrysler 300 key FOB must initially be programmed at the Chrysler dealership. You can use the Chrysler dealership FOB code to change the initial code to your personal code.
A scan tool is required to program a fob on a 2006 Chrysler Town and Country.
The dealer scan tool is required.
Check ebay. A quick search there using "pacifica key" turns up a lot of results including complete new keys and key shells w/blade.
The dealers scan tool is required.
I use the dealer's scan tool.
The dealers scan tool is required.
A scan tool is required. You need the dealer or a locksmith.
How do you program a key fob to a 2003 Chevy Malibu
The dealers scan tool is required.The dealers scan tool is required.