A scan tool is required. You need the dealer or a locksmith.
You have a failure with the key or the computer that senses the chip in the key.
Chrysler Pacifica was created in 2003.
You can not. Chrysler did not put a key cylinder disarm switch on that vehicle.
nothing works and I replaced the battery. to the fob
There is a failure in the chipped key antitheft system.
To program a new ignition switch for a 2006 Chrysler Pacifica, you will need to use the vehicle's onboard diagnostic system. Start by inserting the new key into the ignition and turning it to the "On" position without starting the engine. Leave it in this position for about 10 minutes until the security light turns off, then turn it off and remove the key. Repeat this process two more times, and on the third time, leave the key in the "On" position to complete the programming.
The 2017 Chrysler Pacifica has a 3.6L V6 engine.
To reprogram a 2005 Chrysler Pacifica key fob, first, insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the "Unlock" button on the key fob while turning the ignition back to the "Off" position, then back to "On" again. Release the "Unlock" button and press the "Lock" button on the fob within 5 seconds. Repeat this process for any additional fobs you wish to program, as the system can program up to four fobs.
Check ebay. A quick search there using "pacifica key" turns up a lot of results including complete new keys and key shells w/blade.
Jim Gaffigan is the spokesman for the 2017 Chrysler Pacifica ads.
A ( 2004 to 2006 ) Chrysler Pacifica 3.5 litre V6 engine has a timing BELT A ( 2006 to 2008 ) Chrysler Pacifica 3.8 litre V6 engine has a timing CHAIN A ( 2007 and 2008 ) Chrysler Pacifica 4.0 litre V6 has a timing BELT