yes
Normally only our remotes will work with our receivers. Some universal remotes may be used but may not have all the functionality of our remotes. You would need to get the code for our receiver from the manufacturer or instructions on how to manually program the remote to our receiver.
You can program your DISH remote to work on your TV and other electronic components but unless you have codes or instructions on how to a universal remote to the receiver, we don't have codes specifically to operate in that manner. I would contact the manufacturer of your remote.
The Sony STR-D715 is a stereo receiver. What code you use will depend upon the brand of the remote you are trying to program. There isn't one number that works with every remote. Try all the Sony Receiver codes for your remote as listed in the remote's manual. If they don't work, it seems this model may be too old to be supported.
The remote can work both pieces of equipment. If the remote will not work the receiver, then the remote itself could be the issue. If the remote is not controlling the receiver, press the SAT button and make sure it lights up. If it does, try the functions again. If still nothing, access the System Information screen. Press and hold the SAT button on the remote until all lights at the top come on, then let go and SAT will be blinking. Enter a number between 1 and 15 and press Pound (#). SAT should blink a few times, try the remote again. If still nothing, the remote itself may need to be replaced.
The remote has a radio transmitter built in. The car has a receiver connected to the car locks. The signal from the remote turns on certain circuits in the receiver causing the doors to lock or unlock.
Normally only our remotes will work with our receivers. Some universal remotes may be used but may not have all the functionality of our remotes. You would need to get the code for our receiver from the manufacturer or instructions on how to manually program the remote to our receiver.
how do i program a charter remote to a rca tv
You can probably program your Comcast remote to work with it just fine.
How do I proram an Adelphia remote to work with a Samsung T.V.?
To program the Digital Prism 8-in-1 Universal Remote Control, on must acquire the programming codes for the devices to program. These can be found in the manual for the remote or on the manufacturer's website. Then one follows the directions in the manual as to the order to input the codes.
It will depend upon which Apple Remote, which version of Windows and make of PC. In general you will probably need to: Buy an Infra Red (IR) Receiver and connect it to the PC. Install software that will work with the receiver and find a driver that can recognise the remote. Check what signals are being received and program some function to respond to the command signals. If Windows is being run on a Mac then there is some compatibility supplied with Boot Camp to support the remote.
replaced battery and now remote doesnt work . how do you reprogram remote