Want this question answered?
The steps below can assist you in programming the remote to your Magnavox TV or any other TV with our DISH remotes. Addressing Remote to TV: 1.) Press and hold the clear TV button until all mode lights light up. 2.) Release and TV light will be blinking. 3.) Enter code and press #. The TV button should flash 3 times. 4.) Try functions (Volume, Power, etc..) and see if it is working. 5.) If no function, repeat steps 1-4 with another code.
Here are some codes I found online but none seem to work for my remote. Codes for Magnavox TV when using RCA Universal Remote: 006,007,010,011,013,016,027,033,035,043,066,087,089
The code to program a Magnavox TB110MW9 with a universal remote control can be found in the manual for the remote. Look in the manual for the Magnavox brand STB code, or use the Sylvania brand STB code.
sdsfd
No
It would depend on the brand of remote that is being used. Just look at the instructions that come with the remote to find out how to properly set it up.
To program your remote you have to search for the local channels in your area.
It is the tv that has the set code. Then you need to program the remote to that. Google the manufacturer and make.
You have to pick one and try it's listed code as DVD or VCR. If the codes in the manual fail, try using 002 as a code. It works for the Magnavox MWD2206 (DVD/VCR combo).
Need to know if it is possible to program a charter remote to Magnavox sdtv converter box
To program your universal remote, you will need to know the brand of remote that you own. Once you have figured that out, go to the website of the manufacturer, and they will have instructions listed on how to program your remote.
Found a solution that works well... I picked up a Sony RM-VL600 universal remote with learning capability. With this unit, I've been able to program all the functions of the TB100MW9 DTV Converter box. I picked up this unit at Walmart for $25, but have seen it on Amazon for as little as $16. This remote is a vast improvement over the remote that comes with the Magnavox DTV converter, and was easy to program. Found another solution.... after tinkering with the Philips universal remote for an hour, i finally found a code that can control the magnavox converter. the code is 0759. the Philips remote i have is SRU3006/27 but it might work for any Philips universal remote. the remote itself cost me about 15 dollars. if you call Philips or magnavox they would say none of the remotes can operate the converter.they obviously didn't know their own product...