Locted directly under the drivers side steering wheel is the DLC or Data Line Connector is a set of terminal contacts. Connect a wire(jumper wire) to connector 4 and 8. They are not numbered. Any wire will work, but I used a standard rigid wire to cross connect these 2 pins. it will automatically lock and unlock all doors. There will be approx 16 pins. numbered top left #1 thru bottom right #16. I ordered 2 new RKE Remote Keyless Entry devices and setup these up in 10 mins. you have a minute to do this to other RKE's. (Hold down the lock/unlock buttoms at the same time.) All door locks will automatically let you know if it worked.
How do i you program keyless remote for a 2004 malibu?
how can i program a remote for a 04 kia spectra
You have to program it with a DRB (Scan tool).
try following instructions @ www.programyourremote.com
see also 2004 silverado
I found an Internet site which says how to program the keyless entry remote. But there is an error: this procedure is good for Elantra 2001 to 2003. Elantra 2004 must be programmed by the dealer. http://car.justanswer.com/hyundai/n1kw-program-remote-entry-hyundai-2004
My 2004 land rover discovery 2 doesnt work?
Take the vehicle to a dealer. Not a consumer option.
You need one of these: http://en.wikipedia.org/wiki/Amstrad_CPC_664
one hr of labor like $45.00
all gms with a stock radio keyless remotes get reset though it, again it is step by step in owners manual
you need to take it to a dealer or repair shop because you have to do it using a computer.